GE Appliances 18 Owner's Manual page 13

Behind the Refrigerator
Be careflll when lnoving the refrigerator
away from the wall. All types of floor
coverings can be damaged, particularly
cushioned coverings and those _ith
embossed sm{hces.
Pull the refrigerator straight out and remm
it to position by pushing it straight in.
Moving the refligerator in a side direction
may result in damage to the floor covering
or refligerator.
When pushing the refrigerator back,
make sure you don't roll over the power
cord or icemaker supply line.
Light Bulb Replacement
To replace a burned-out bulb, unplug the
refrigerator from its electrical outlet,
remove the light shieM, unscrew the bulb
when cool and replace it with an appliance
bulb of the same or lower wattage.
Turning the control to the OFFposition doesnot
re.move power to the light circuit,
Preparing for Vacation
For long vacations or absences, remove
food and unplug the refrigerator. Move the
freezer control to the OFF position, and
clean the interior _4th a baking soda
solution of one tablespoon (15 lnl) of
baking soda to one quart (11) of water.
Leave the doors open.
Move fl_e icelnaker feeler arm to the STOP
(up) position and shut offthe water supply
to the refrigerator.
If the telnperamre can drop below freezing,
have a qualified sexvicer drain the water
supply systeln to prevent serious property
damage &le to flooding.
Preparing to Move
If the doors need to be relnoved, see the
Removingthe doors section.
Secure all loose items such as grille, shelves
and drawers by taping them securely
in place to prevent damage.
Be surethe refrigeratorstoys in an upright
position duringmoving,
13