Table of Contents
Advertisement
6.OPERATION
Communication setting
You can set the condition for communication between PANATERM
and the amplifier. Note that the conditions are effective only
on the personal computer and are not introduced to the amplifier.
■Notes:
・Usually, use PANATERM
Communication set-up
1 Click "File" on the PANATERM
"Communication set-up".
2 The communication window will
appear. Click the input area of the item to be set.
3 Input or select the setting.
4 To enable the setting, click "OK".
<RS232C setting>
MINAS-A4 series cannot use this setting.
"RS232C port":
"Communication speed": Select communication speed in the range
from 2400 bps to 9600 bps.
■Notes:
・ ・When the communication speed has been changed, communication cannot be
・ established
unless the communication speed on the amplifier is set to the same value.
<Protocol setting>
"Time-out period T1": Specify the time-out time T1 between
"Time-out period T2": Specify the time-out time T2 between
"Retry times":
®
with the initial setting.
®
menu bar, and click "Setting" and
Select a communication port to be used from
COM1 to COM16.
characters in 0.1second units.
protocols in second.
Specify the number of communication
retries. The setting range is 1 to 8.
－ 70 －
®
Hide quick links:
Advertisement
Table of Contents
