Panasonic PANATERM Ver. 3.7 Instruction Manual page 4

Do not connect the communication
cable when the power is on to the
amplifier or the personal
computer.
Failure to follow this could result
in injuries.
After turning on or off the
power to the amplifier,
shut down PANATERM
and re-start it.
Failure to follow this could result
in injuries.
CAUTION
®
,
－ 3 －
Do not connect or disconnect the
communication cable after the
software is started.
Failure to follow this could result
in injuries.
Do not bring any magnetized
article close to the disk
containing this software.
(Such as a motor. Do not
bring it close to the disk.)
Failure to follow this could result
in injuries.