Setup - Panasonic PANATERM Ver. 3.7 Instruction Manual

3.SETUP

Install PANATERM
using setup CD-ROM. PANATERM
network drive. It cannot be installed or setup by any other
means, such as the copy function. It cannot be started from a
CD-ROM.
1 Turn on the power to the personal computer, and start
Windows ® (If any software has been started, terminate it.)
2 Insert the PANATERM
If the autorun program starts at this time, execute
operation according to the guidance, and move on to 5.
3 Start Explorer (for Explorer starting procedure, see the
manual for Windows
4 Double-click the setup program on the CD-ROM.
Japanese version setup is in "Japanese" directory. English
version setup is in "English" directory.
Execute setup.exe on Windows
on Windows
(If the "Add application" menu on the control panel is used,
the software may not be installed normally.)
In the middle of the procedure, you will be asked to replace
the setup disk. It is not failure, so keep pushing OK button
until the following screen is displayed.
5 The PANATERM
®
on the hard disk of the personal computer
®
setup CD-ROM into the CD-ROM drive.
® ), and switch to the CD-ROM drive.
® XP.
®
setup program will start.
®
cannot be installed on the
® 98,Me, 2000, and SetupXP.exe
－ 12 －