Table of Contents
Advertisement
(1) Title bar Providing for window operation.
(2) Tool bar
(Exit)
(3) Tab
"Target"
"Positioning Input/output
status"
"Load"
(4) Monitor display area
(5) Current information
"Command position"
"Actual position"
"Position error"
"Full close error"
"Actual speed"
"Torque"
"Warning"
"Alarm"
■Notes:
・Data is transferred between the amplifier and the personal computer via the
RS-232 serial communication port. Owing to the communication speed, values
are displayed on the screen with a little delay.
・When the polarity is positive (+), its symbol is not displayed.
・Monitor does not provide for instrumentation. Be sure to use the speed and
torque indications as approximations.
Closing the parameter window.
Switching the items to be monitored.
Monitors the current positioning status.
Monitors the status of input and output signals. This
information comprises two windows: I/O 1 and I/O 2.
Monitors load-related information.
Displaying different data according to the
monitor item switched by the tab.
Monitoring the current status at any time
Indicates the sum of command pulses generated after the
amplifier Control power is turned on.
Indicates the position due to feedback pulse of the
amplifier. The unit is pulse.
Indicates the current cumulative pulse count on the error
counter. The unit is pulse.
Indicates the cumulative pulse count at full close control.
The unit is pulse.
Indicates the current speed. The unit is r/min.
・Polarity (+): Counterclockwise turn
・Polarity (-): Clockwise turn
Indicates the current torque as a ratio to the rated torque.
The unit is %.
Indicates the details of a warning.
Indicates the current status of an alarm.
－ 65 －
Hide quick links:
Advertisement
Table of Contents
