STEP 2: Preparing the speakers
Assembling the front and surround speakers
[BTT790] Front speakers, Surround speakers [BTT490] Front speakers
1
Attach the stand to the base.
3
Attach the speaker.
[BTT583] Front speakers
1
Thread the speaker cable.
≥ Use suitable speaker cables for each speaker type. (
≥ When attaching the speakers to a wall (
Remove the base.
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
Thread the speaker
cable through the
base.
Speaker cable
12)
42)
2
Tighten the 3 screws (supplied) securely.
Slide the speaker cable into the
groove.
4
Tighten the screw (supplied) securely.
2
Pull the cable and slide into the groove.
≥ When reattaching the base to the speaker
Put the base on the speaker, and then do the
base removal operation in reverse order.
Back of the base
VQT3Z79
11