Panasonic SC-BTT790 Operating Instructions Manual page 45

This unit is turned off when the input for the
TV is switched.
This is a normal phenomenon when using
VIERA Link (HDAVI Control 4 or later). For
details please read the operating instructions
for the TV.
The remote control doesn't work properly.
Change the batteries in the remote control.
( 8)
The remote control and main unit are using
different codes. If "SET " is displayed on the
unit's display when a button is pressed on the
remote control, change the code on the
remote control. (
The TV tuner mode is not displayed when the
TV is switched on.
This phenomenon may occur, depending on the
TV setting, when "Quick Start" is set to "On".
Depending on the TV, this phenomenon may
be prevented by reconnecting the HDMI cable
to a different HDMI input terminal or by
changing the HDMI auto connection setting.
You have forgotten your ratings password.
You want to cancel the ratings level.
The ratings level returns to the factory preset.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button on the remote
control at the same time for more than 5 seconds.
j"00 RET" is displayed on the unit's display.
2 Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until "03 VL" is
displayed on the unit's display.
3 Press [OK] on the remote control or
[< OPEN/CLOSE] on the unit.
This unit does not recognize the USB
connection correctly.
Disconnect and reconnect the USB cable. If it
still does not recognize the connection, turn
this unit off and on again.
USB devices may not be recognized by this
unit when connected using the following :
ja USB hub
ja USB extension cable other than the
supplied with the Wireless LAN Adaptor
DY-WL5 (optional)
If you connect USB HDD to this unit, use the
USB cable that is supplied with the HDD.
40, 49)
The unit switches to standby mode.
This unit will automatically turn to standby
mode after 30 minutes if it is inactive. (
When the time set for the sleep timer has
passed, the main unit will be turned off. (
One of the unit's safety devices is activated.
Press [Í/I] on the main unit to turn the unit on.
The unit does not turn off.
1 Press and hold [Í/I] on the main unit for 5
seconds. (If still unable to turn the unit off,
disconnect the AC mains lead, wait 1 minute,
then reconnect the AC mains lead.)
2 Reset the unit as follows:
While the unit is off, press and hold
[+ VOLUME], [< OPEN/CLOSE] and [Í/I] on
the main unit at the same time for more than 5
seconds.
Picture
The images from this unit do not appear on
the TV.
Picture is distorted.
Jittering occurs.
An incorrect resolution is selected in "HDMI
Video Format". Reset the setting as follows:
1 While the unit is on, press and hold [OK], the
yellow button and the blue button on the
remote control at the same time for more than
5 seconds.
j"00 RET" is displayed on the unit's display.
2 Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until "04 PRG" is
displayed on the unit's display.
3 Press and hold [OK] on the remote control or
[< OPEN/CLOSE] on the unit for at least
3 seconds.
Set the item again. (
jWhen Dolby Digital Plus, Dolby TrueHD,
and DTS-HD audio are not output in
bitstream, select "Yes" in "Default Settings"
and make proper settings. (
The unit and television are using different
video systems.
1 While the unit is on, press and hold [OK], the
yellow button and the blue button on the
remote control at the same time for more than
5 seconds.
–"00 RET" is displayed on the unit's display.
2 Repeatedly press [1] (right) on the remote
control or [Í/I] on the unit until "05 P/N" is
displayed on the unit's display.
(Continued on the next page)
21)
8)
36)
40)
45
VQT3Z79