Grizzly G0732 Owner's Manual page 48

Cutting Rabbets with a Standard
Blade
Page 31
To cut rabbets with the standard blade:
1.
2.
3.
4.
5.
Figure 70,
Blade
Figure 70
DO NOT place a tall board on edge to per-
form a rabbet cut with a standard blade.
Workpieces that are too tall to properly
support with the fence can easily shift dur-
ing operation and cause kickback. Instead,
place the stock flat on the saw and perform
the rabbet cut with a dado blade, as instruct-
ed on Page 45.
6.
7.
Figure 71
Blade
Figure 71