Changing The Door Hinging - Miele KWT 4154 UG-1 Operating And Installation Manual

Changing the door hinging

The appliance is supplied right-hand
hinged. If left-hand door hinging is
required, follow the instructions below.
^ Close the door, and unscrew the top
hinge pin from the door a.
^ Unscrew the bracket b from
underneath the door.
^ Tip the door forward slightly c, and
lift it up and off d.
30
^ Unscrew the top hinge plate e, turn
it around, and refit it on the opposite
side.
^ Unscrew the lower hinge plate f.
^ Remove the hinge pin g, and
replace it in the hinge plate from
underneath. Ensure that the hinge pin
spacer is positioned correctly.
^ Turn the hinge plate around, and refit
it on the opposite side.