Frequently Asked Questions - Miele KWT 4154 UG-1 Operating And Installation Manual

Frequently asked questions

With the aid of the following guide minor problems can be corrected without a ser-
vice call.
Repairs should only be carried out by a qualified and trained person in strict
accordance with local and national safety regulations. Unauthorized repairs
could cause personal injury or machine damage and may void the warranty.
What if the appliance does not get cold?
Possible fault
The machine is not turned on.
The machine is not plugged in.
Check that the fuse has not tripped.
What if the compressor kicks on very frequently and for too long?
The ventilation slits are covered or
dusty.
The door has been opened too
frequently.
The door is not closed.
What if the alarm sounds and the temperature display flashes?
The appliance door has been opened
for more than 60 seconds.
The appliance door has been opened
too frequently.
The ventilation slits are covered.
A power failure has occurred.
22
Solution
Check whether the appliance is
switched on. The display must be lit up.
Check that the plug is correctly
inserted in the power outlet.
Reset the circuit breaker.
Clean with a vacuum or brush.
Once the appliance returns to the set
temperature the compressor will turn
off.
Check that the door has been closed
properly.
Close the door.
One of these conditions has caused the
temperature in the appliance to
become too warm or cold.
Once the alarm condition has been
corrected, the temperature display will
light up continuously and the alarm will
turn off.