Setting The Temperature - Miele KWT 4154 UG-1 Operating And Installation Manual

^ Press the temperature selector (+/-)
buttons for the upper zone to select
either Fahrenheit °F or Celsius °C:
^ To save the setting, press the
constant humidity button.
^ To exit the settings mode, press the
On/Off button. Otherwise, the
electronics will automatically return to
normal mode after approx. 2 minutes.

Setting the temperature

The temperature for each respective
zone can be set using the "+ / -" buttons
below the temperature displays.
+ button: increases the temperature
- button: decreases the temperature
The temperature being set will flash in
the display.
Optimum temperature and air quality
When pressing the buttons, the
following changes will appear in the
respective temperature display:
– When first pressed: The last
– Each subsequent press of the
– Holding down the button will adjust
Approximately 5 seconds after the
button is released, the actual
temperature in the respective zone will
be displayed.
The two temperature zones are cooled
alternately, so depending on the
quantity of wine being stored, it may
take several hours for the desired
temperature to be reached, and for the
temperature display to adjust. If, after
this amount of time, the temperature is
still too high or too low, you will need to
adjust it again.
Temperature range
The temperature in both sections can
be set to anywhere between 41°F (5°C)
and 68°F (20°C).
temperature selected flashes.
button: adjusts the temperature in
increments of 1 °.
the temperature continuously.
11