After Ironing; Power Cut - Miele B 990 Operating Instructions Manual

For small items, e.g. handkerchiefs,
alternate between using the right and
left hand sides of the roller.
Items with raised buttons should be
ironed face down on to the roller so that
they are pressed into the cushioned
surface.
A cloth should be placed over zips,
metal buttons and hooks to protect the
heater plate during ironing.
To protect the heater plate do not iron
very bulky or heat-sensitive buttons.
When you have nearly finished ironing,
you can set the temperature selector to
I and continue ironing small items at a
low temperature.

After ironing

^ Switch the ironer off.
^ Set the temperature selector to I.
^ Disconnect the appliance from the
electricity supply by switching off at
the socket and withdrawing the plug.
If the ironer is to be put away:
^ Allow the heater plate to cool down.
^ Fold the rotary ironer up.
^ Wind up the mains cable.
^ Cover the ironer.

Power cut

In the event of a power cut activate
the emergency release.
If there is a power cut whilst you are
ironing the heater plate will stay in
contact with the roller. This traps the
laundry with the danger of it singeing.
To free it:
^ Pull the emergency release catch
upwards.
– This releases the pressure enabling
the laundry to be pulled forwards
towards you, or downwards off the
roller, depending on how far through
the ironer it had passed.
When power is restored (the On-Off
indicator light will come on) press the
emergency release catch back down.
You can now continue ironing.
Ironing
19