After Sales Service - Miele B 990 Operating Instructions Manual

In the event of a fault, please contact:
– your Miele dealer or
– the nearest Miele Service
Department, (see address on the
back page).
When contacting Miele, please quote
the Model and Serial number of your
appliance, both of which are shown on
the data plate, located at the front
underneath the ironing table.
a Model
b Serial number
c Voltage / frequency
d Fuse rating
e Total rated load
The wiring diagram is located at the
front right hand side of the ironing table
behind the plastic cover.
Please note that telephone calls may
be monitored and recorded for
training purposes.

After sales service

N.B. A call-out charge will be
applied for unnecessary service
visits where the problem could have
been rectified as described in this
instruction manual.
31