Marantz PS2100 User Manual page 16

NUMBER DISPLAY
1 POP
2 ROCK
3 MOR
4 LIGHT
5 CLASSIC
6 NEWS
7 AFFAIR
8 INFO
9 SPORT
10 EDUCATE
11 DRAMA
12 CULTURE
13 SCIENCE
14 OTHERS
15 OTHER
16 WEATHER
17 FINANCE
18 CHILDREN
19 SOCIAL
20 RELIGION
21 PHONE IN
22 TRAVEL
23 HOBBIES
24 JAZZ
25 COUNTRY
26 NATION
27 OLDIES
28 FOLK
29 DOCUMENT
By main unit
To change the mode of JOG control M to RDS, press the TUNER
1.
button E until "RDS MODE" appears on the display.
Turn the JOG control M until the display indicates "PTY SEEK"
and press the ENTER button M.
TUNER
2. The current station's PTY or the currently selected PTY group will
be shown in the display.
To select a PTY group, turn the JOG control M until the specified
PTY is shown in the display and press the ENTER button M.
MULTI JOG
3. The PTY Auto seek will start, and the tuner will detect each station
broadcasting RDS whose PTY information corresponds to the
selected choice.
PROGRAMME TYPE
Pop Music
Rock Music
M. O. R. Music
Light classical
Serious classical
News
Current Affairs
Information
Sport
Education
Drama
Culture
Science
Varied
Other Music
Weather
Finance
Children's programmes
Social Affairs
Religion
Phone In
Travel
Hobbies
Jazz Music
Country Music
National Music
Oldies Music
Folk Music
Documentary
MULTI JOG
(PUSH ENTER)
(PUSH ENTER) MULTI JOG
4. The auto search will stop at a station with the specified PTY. To
advance to the next RDS station with the specified PTY, press the
ENTER button M again within 5 seconds.
To cancel this function, press the ENTER button during scanning.
RDS SEEK BY JOG CONTROL
RDS MODE
MULTI JOG
PTY SEEK
MULTI JOG
MULTI JOG (PUSH ENTER)
TP (TRAFFIC PROGRAMME) SEEK
TP is the information of traffic programme in RDS. It is possible that
the programme will be broadcasted with a TP flag. (But this is not
always the case.) The TP SEEK function searches for this flag.
By remote control
Press the PTY./.. button ⁄2 a few times until "TP SEEK" is shown
1.
on the display.
Press the ENTER button n to start TP SEEK, and scanning will
2.
start.
3. The tuner will stop scan when a broadcast is received and TP flag
is detected. "TP" segment of the display lights up.
By main unit
1. To change the JOG mode to RDS mode press the TUNER button
E until the display indicates "RDS MODE" and press the ENTER
button of JOG control M. Turn the JOG control M until the display
indicates "TP SEEK" and press the ENTER button.
2. The TP SEEK will start, and the tuner will stop scanning when a
broadcast is received and TP flag is detected. "TP" segment of the
display lights up.
TA (TRAFFIC ANNOUNCEMENT) SEEK
MULTI JOG
(PUSH E
TA is the information of traffic announcement in RDS. TA is an audio
announcement, and can be heard through the speakers.
By remote control
Press the PTY./.. button ⁄2 a few times until the display indicates
1.
"TA SEEK".
Press ENTER button n to start TA SEEK, and scanning will start.
2.
3. The tuner will stop scanning when a broadcast is received and TA
flag is detected. "TA" segment of the display lights up.
(PUSH ENT 4. The tuner outputs traffic information through the speaker. Volume
level can be adjusted.
By main unit
To change the mode of JOG control M to RDS mode, press the
1.
TUNER button E until the display indicates "RDS MODE" and
then press the ENTER button of JOG control M. Turn the JOG
control M until the display indicates "TA SEEK" and press the
ENTER button M.
2. The TA SEEK will start, and the tuner will stop scanning when a
broadcast is received and TA flag is detected. "TA" segment of the
display lights up. The tuner outputs traffic information through
speaker. The volume level can be adjusted.
12
TP SEEK TA SEEK
MULTI JOG
MULTI JOG (PUSH ENTER) MULTI JOG (PUSH ENTER)
Start RDS function
EON SEEK
MULTI JOG
MULTI JOG (PUSH ENTER)