Control Button On The Remote Control Unit; Power Button; Function Buttons; Menu Button - Marantz PS2100 User Manual

CONTROL BUTTON ON THE
REMOTE CONTROL UNIT
z Power button
Press this switch to turn the power of the unit ON. Press this button
again to turn the unit OFF, and the unit enters standby mode.
x DOOR button
Press this button to open or close the front panel. If components of
Marantz AV system are connected through the remote control bus, the
DOOR button allows the doors on the system components to be opened
or closed.
Note:
The DOOR button is invalid if the components are not connected
through the remote control bus or the system control switch is not
set to SYSTEM position. (The system control switch is on the rear
panel.)
c Function buttons
There are FM/AM, CD, CD-R, MD, VCR, AUX, DVD, LD/VCD, and TV
buttons. These buttons are used to select the source to be played or
recorded.
To switch the input selector of the receiver, press the button twice.
v AMP button
Press this button to switch to AMP mode of the remote control and
receiver.
b MENU button
This button is used to turn ON the menu system of other components.
n Cursor buttons and ENTER button
These buttons are used to move the cursor of the menu system of the
components, in the same way as the receiver's JOG control, left, right
and enter.
m TEXT/DISP (display) button
This button is used to display the text or other information from the DVD,
CD, CD-R and MD.
Pressing this button can also indicate the present time on the main unit
or display information from the RDS data system. To change the backlight
of the LCD to dimmer or normal, press this button for more than 3
seconds.
, MEMO/PROG (program) button
This button is used to store the preset memory of the tuner and clock or
to program CD, DVD, CD-R tracks.
. Numeric (ten keypad) or amp control
button
These buttons are used to select the preset memory of the tuner, or to
control the BASS and TREBLE of the receiver.
Please refer below. To switch to amp control mode, press the AMP
button before pressing the numeric buttons.
Button Numeric
1 1
2 2
3 3
4 4
5 5
6 6
7 7
8 8
9 9
0 0 or +10
⁄0 4 /TIMER program
a. This button is used to decrease the number on the tuner preset
memory or return to previous tracks on CD, DVD, or CD-R.
b. To activate the timer program of the receiver in AMP mode, press this
button.
⁄1 ¢ /SLEEP timer
a. This button is used to increase the number on the tuner preset memory
or advance to next track on CD, DVD, or CD-R.
b. To activate the sleep timer of the receiver in AMP mode, press this
button.
⁄2 Control buttons (PLAY, STOP, PAUSE,
FF, REW, REPEAT mode)
By switching input source, these buttons can be used to operate the CD
player, DVD player, CD-R, MD recorder and VCR, and can be used to
operate the TV and tuner.
Please refer below.
Button CD, DVD, CD-R,
MD, VCR, LD/VCD
Play Play
Stop Stop
Pause Pause or still
FF FF
Repeat mode Repeat
Rew Rew
⁄3 TV/AMP VOLUME button
These buttons are used to change the volume for listening. Press the
5 button to increase and the ∞ button to decrease the volume.
These buttons are used to change the sound level of the TV set when
the selected function is TV. These buttons are used to change the
sound level of the amplifier when the selected function is except TV.
⁄4 MUTE button
Press to mute the sound from the speakers. When this button is pressed,
the speakers' sound level is muted and "MUTE" appears on the display.
Pressing this button again cancels the muting function, and it can also
be cancelled by pressing one of the function buttons.
This button is used to mute the sound level of the TV set when the selected
function is TV.
Note:
This operation applies to TVs manufactured by Philips.
4
Amp control
6CH Direct for DVD player
TREBLE down
TREBLE up
SURROUND mode selection
BASS down
BASS up
CHANNEL selection
TEST TONE is activated
LOUDNESS control for SR2100
No action
TV Tuner
./.. Digit PTY
Video No output
OSD NEWS/TA
CH-CALL No output
No output No output
SOUND No output