Marantz NR1504 Owner's Manual page 101

Manual EQ
Use the 9 band graphic equalizer to adjust the tone of each speaker.
"Manual EQ" can be set when "MultEQ ® " setting (vpage 97) is "Manual EQ".
Setting items
Speaker Select. All : Adjust the tone of all speakers together.
Left/Right : Adjust the tone of left and right speakers together.
Select whether to adjust
Each : Adjust the tone of each speaker.
tones for individual speakers
or for all speakers.
Adjust EQ q Select the speaker.
Adjust tonal balance for
• Select the speakers you want to adjust when "Left/Right" or "Each"
each frequency band. Adjust is selected.
the speaker selected in w Select the adjustment frequency band.
"Speaker Select.". 63Hz / 125Hz / 250Hz / 500Hz / 1kHz / 2kHz / 4kHz / 8kHz / 16kHz
e Adjust the level.
–20.0dB – +6.0dB (0.0dB)
Curve Copy Yes : Copy.
Copy "Audyssey Flat" No : Do not copy.
(vpage 97) curve from
MultEQ ® .
• "Curve Copy" is displayed after Audyssey ® Setup has been performed.
• When you select "Curve Copy" and press
Flat"?" prompt is displayed. Select either "Yes" or "No", and press
ENTER
.
Set Defaults Reset : Reset to the defaults.
The "Manual EQ" settings Cancel : Do not reset to the defaults.
are returned to the default
When you select "Set Defaults" and press
settings.
ENTER , the "Reset to the default values?"
prompt is displayed. Select either "Reset" or
"Cancel", and press
DVD
Audio
Default settings are underlined.
Setting details
ENTER , the "Copy "Audyssey
ENTER
.
98