Connections; Important Information - Marantz NR1504 Owner's Manual

Connections

Important information

Make connections before using this unit.
To create a home theater that can play back higher quality video and audio by fully utilizing the
capabilities of this unit and your video devices, connect this unit to each of your video devices with
HDMI cables.
n HDMI devices
vpage 9
vpage 10
vpage 10
If your video device does not support HDMI connections, use the following connection.
n Other devices
vpage 13
vpage 15
vpage 18
vpage 21
This unit can change the source that is assigned to the DIGITAL AUDIO IN, ANALOG AUDIO IN and
VIDEO IN connectors.
For details on assigning a source to connectors, see "Changing the source assigned to connectors"
(vpage 12). For the setting method, see "Input Assign" (vpage 103).
DVD
vpage 10 vpage 10
vpage 10 vpage 10
vpage 10
vpage 14 vpage 15
vpage 16 vpage 17
vpage 19 vpage 20
vpage 79 vpage 22
NOTE
• The menu screen is only displayed on TV connected to this unit via HDMI. If your TV is connected
to this unit via other video output connectors, perform menu operations while seeing the display
on this unit.
• Do not plug in the power cord until all connections have been completed. However, when the
"Setup Assistant" is running, follow the instructions in the "Setup Assistant" (C page 7) screen
for making connections. (During "Setup Assistant" operation, the input/output connectors do not
conduct current.)
• When running the "Setup Assistant" (C page 7), turn off the power supply of connected devices.
• When making connections, also refer to the operating instructions of the other devices being connected.
• Be sure to connect the left and right channels properly (left with left, right with right).
• Do not bundle power cords together with connection cables. Doing so can result in noise.
5