Advertisement
To install the cutter blade, mount the
flange, cutter blade, flange and hex nut
onto the spindle in that order, making
sure that the cutter blade is installed with
teeth pointing up a t the front of the tool.
WARNING:
Remove all wood chips or foreign matter adhering to the spindle, flanges, etc. before
instal I i ng the cutter blade.
Hex nut
Flange
Flange
When using cutter blades
7.5
mm (5/16")
wide or less, install
a
flange 35 between the
cutter blade and the flange
as
shown in the
figure.
Flange
Cutter blade
Use the two wrenches to tighten the hex
nut securely.
8
Advertisement
