Advertisement
ADDITIONAL SAFETY RULES
1.
Inspect for and remove nails or foreign matter from the workpiece before
2.
Check the cutter blade carefully for cracks or damage before operation.
3.
Secure the workpiece firmly.
4.
Do not wear gloves during operation.
5.
Hold the tool firmly w i t h both hands.
6.
Keep hands away f r o m the underside of the belt cover and the cutter blade.
Also keep the cord away from them.
7.
Never force the t o o l or c u t t o o fast for existing conditions.
8.
Release the s w i t c h immediately if the cutter blade binds or the tool stalls.
9.
Never remove the t o o l from a c u t while the cutter blade is rotating.
operation.
Replace cracked or damaged cutter blade immediately.
IO.
Never leave the t o o l running unattended.
1 1 .
Never attempt t o c u t with t h e tool held upside d o w n in a vise. This is
extremely dangerous and can lead t o serious accidents.
12.
S w i t c h o f f and unplug the t o o l and w a i t for the cutter blade t o come t o
a
complete stop before removing wood chips if wood chips are jammed in the
chip chute. Always use a wooden stick, etc. t o remove them.
SAVE THESE INSTRUCTIONS.
4
Advertisement
