Advertisement
Also, the miter guide rule position can be
determined using
the
indicator on
the
miter guide rule. Adjust the indicator so
that i t s length is
0.5
mm (0.02") shorter
than the distance (A) between the edge of
the tool base and the side of the cutter
blade. With
this
adjustment,
the
indicator
will project toward the cutter blade within
0.5
mm (0.02")
of
it
as
the edge of the
tool slides along the edge of the miter
guide rule. Secure the miter guide rule
a t
the position where the indicator tip is
0.5 mm (0.02") away from the cutting line.
? < :
mm
(0.02")
Cutter blade
indicator
CAUTION
:
Unplug the tool and re-adjust the indicator when changing the miter angle of the miter
guide rule.
Dado cutting guide rule (optional accessory)
WARNING :
Always make sure that the tool is switched off and unplugged before making any adjust-
ments.
Firmly clamp a straight board to the work-
piece parallel to the cutting line and use
it as a
guide against the dado cutting
guide rule. Adjust the dado cutting guide
rule so that the arrow on the scale plate i s
aligned with the cutting line. The best
distance between the cutting line and the
guide (straight board) i s approx. 150 mm
(5-29/32").
Cutting line
Approx.
150 mm (5-29/32")
11
Advertisement
