Advertisement
Shiplapping attachment
Use the shiplapping attachment when cut-
ting the edge of the workpiece. Attach the
shiplapping attachment to the guide rule
using the screws.
Align the right side of the cutter blade with
the cutting line. Move the guide rule until
the shiplapping attachment contacts the
side of the workpiece. Then tighten the
wing bolt firmly to secure the guide rule.
Guide
rule
/
/
Shiplapping attachment
Removing or installing cutter blade
WARNING :
Always be sure that the tool is switched off and unplugged before removing or installing
the cutter blade.
To remove the cutter blade, loosen the
wing bolt and take off the cutter cover.
Hold the outer flange with wrench 21 and
loosen the hex nut with wrench 19 by
turning counterclockwise. Remove the hex
nut, outer flange and cutter blade.
\
Loosen
7
Advertisement
