52
MAKING CONNECTIONS
Component connection
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the 15
pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Back of the product.
RGB/AV
/COMPONENT OUT
RGB/AV
/COMPONENT IN
(not included)
PC
NOTE
When connecting to the AV or Component
y
port using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
RGB/AV
AUDIO
/COMPONENT OUT
IN
RGB/AV
AUDIO
/COMPONENT OUT
IN
RGB/AV
/COMPONENT IN
RGB/AV
/COMPONENT IN
(not included)
AV (CVBS)
AV(CVBS) connection
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the 15
pin signal to RCA cable as shown on the following
illustration.
Back of the product.
RGB/AV
/COMPONENT OUT
AUDIO
IN
RGB/AV
/COMPONENT IN
(not included)
AV (CVBS)
PC
NOTE
For AV (CVBS) connection, the red and blue
y
cables in a shared interface are not in use.
AUDIO
IN
(not included)