Connecting The Speakers (55Vs20); Portrait Layout - LG 42VS20 Owner's Manual

10
ASSEMBLING AND PREPARING
Connecting the Speakers
(55VS20)
- Only on some models.
1
Connect the input signal cable to the Monitor
before installing the speakers. Use a cable tie
to organize the cables.
2
Mount the speaker by using a screw as shown
in the following. Then connect the speaker
cable.
3
After installing your speakers, use holders and
cable ties to organize the speaker cables.
NOTE
Connect the speaker terminals noting the
y
correct polarity.

Portrait Layout

- Only on some models.
When installing in a Portrait Layout, rotate the
monitor clockwise 90 degrees (when facing the
screen).
Using the Kensington security system
The Kensington security system connector is
located at the back of the Monitor set. For more
information of installation and using, refer to the
manual supplied with the Kensington security
system or visit http://www.kensington.com .
Connect the Kensington security system cable
between the Monitor set and a table.
NOTE
The Kensington security system is optional.
y
You can obtain additional accessories from
most electronics stores.