Component Connection; Av(Cvbs) Connection - LG 47WV50BR Owner's Manual

56
MAKING CONNECTIONS

Component Connection

Transmits the analog video and audio signals from
an external device to the monitor set. Connect
the external device and the monitor set with the
RGB-Component cable as shown in the following
illustration.
Back of the product.
RGB
/COMPONENT OUT
RGB
/COMPONENT IN
(not included)
NOTE
When connecting to the component port
y
using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
AUDIO
RGB
/COMPONENT OUT
IN
AUDIO
COMPOSITE
IN
RGB
/COMPONENT IN
REMOTE
CONTROL IN
REMOTE
CONTROL IN
(not included)
VIDEO OUT

AV(CVBS) Connection

Transmits the analog video and audio signals from
an external device to the monitor set. Connect
the external device and the monitor set with
the composite cable as shown in the following
illustration.
Back of the product.
COMPOSITE
AUDIO
IN
REMOTE
CONTROL IN
(not included)
VIDEO OUT
NOTE
If input signals are received through the AV
y
cable, multiple monitors cannot be connected
via the RGB OUT port.
Input signal may be degraded or lost when
y
multiple monitors are connected.
For component, in general, up to 3 monitors
y
can be connected via the Component Out
port (RGB Shared) if the signal is stable and
there is no cable loss.
If you want to connect more than this number
y
of monitors, we recommended that you use a
distributor.
AUDIO
IN
REMOTE
CONTROL IN
(not included)