52
MAKING CONNECTIONS
Component connection
Transmits the analog video and audio signals from
an external device to the Monitor set. Connect the
external device and the Monitor set with the 15
pin signal to RCA cable as shown on the following
illustration. To display images by using progressive
scan, make sure to use the component cable.
Back of the product.
NOTE
When connecting to the Component port
y
y
using the shared interface, the port must
match up to the input source. Otherwise,
noise may occur.
Connecting to the LAN
A
Using a router(Switch)
LAN
Switch
Monitor Set
Network
B
Using the Internet.
LAN
Network
Monitor Set
Connecting to a USB
Connect a USB storage device such as s USB
flash memory, external hard drive, MP3 player or
a USB memory card reader to the Monitor set and
access the USB menu to use various multimedia
files.
or
PC
PC