LG 47VS20 Owner's Manual
  1. Manuals
  2. Brands
  3. LG Manuals
  4. Digital Signage
  5. 47VS20
  6. Owner's manual

LG 47VS20 Owner's Manual

Monitor signage
Hide thumbs Also See for 47VS20:
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL
MONITOR SIGNAGE
Please read this manual carefully before operating the your set and
retain it for future reference.
MONITOR SIGNAGE MODELS
42VS20
42VX30MS
47VS20
47VX30AS
55VS20
47VX30AF
www.lg.com

Advertisement

Table of Contents
loading

Related Manuals for LG 47VS20

Summary of Contents for LG 47VS20

  • Page 1 OWNER’S MANUAL MONITOR SIGNAGE Please read this manual carefully before operating the your set and retain it for future reference. MONITOR SIGNAGE MODELS 42VS20 42VX30MS 47VS20 47VX30AS 55VS20 47VX30AF www.lg.com...
  • Page 2 WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

  • Page 3: Table Of Contents

    CONTENTS CONTENTS - Viewing movies LICENSES - Viewing photos - Listening to music ASSEMBLING AND - Viewing the Contents List PREPARING - DivX® VOD Guide - Using PIP/PBP Accessories Optional Accessories CUSTOMIZING SETTINGS Parts and buttons Connecting the stand Accessing main menus Connecting the Speakers - PICTURE settings Portrait Layout - AUDIO settings Mounting on a wall - TIME settings - OPTION settings REMOTE CONTROL - Picture ID - NETWORK settings USING THE MONITOR SET MAKING CONNECTIONS Connecting to a PC Connecting to a HD receiver, DVD,...
  • Page 4 CONTENTS IR CODES CONTROLLING THE MULTIPLE PRODUCT Connecting the cable RS-232C Configurations Communication Parameter Command reference list Transmission / Receiving protocol...

  • Page 5: Contents

    LICENSES LICENSES Supported licenses may differ by model. For more information of the licenses, visit www.lg.com. HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC. ABOUT DIVX VIDEO: DivX is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This is an official DivX Certified device that plays DivX video. Visit divx.com for more information and software tools to convert your files into DivX videos. ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified device must be registered in order to play purchased DivX Video- on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup menu. Go to vod.divx.com for more information on how to complete your registration. DivX Certified to play DivX video up to HD 1080p, including premium content. DivX , DivX Certified and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under license. Covered by one or more of the following U.S. patents: 7,295,673; 7,460,668; 7,515,710; 7,519,274 Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. VESA, VESA logo, DisplayPort Compliance Logo and DisplayPort Compliance Logo for Dual-mode Sources are registered trademarks of the Video Electronics Standards Association.

  • Page 6: Assembling And Preparing

    ASSEMBLING AND PREPARING ASSEMBLING AND PREPARING Accessories Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product. The illustrations in this manual may differ from the actual product and accessories. POWER MONITOR ENERGY INPUT SAVING . , ! PQRS WXYZ 1/a/A CLEAR - * # MARK BRIGHT NESS MUTE MENU AUTO S.MENU BACK EXIT TILE Remote control and Batteries Power Cord DVD (Owner's Manual)/ Card D-sub 15 pin signal cable CAUTION Do not use any pirated items to ensure the safety and product life span. Any damages or injuries by using pirated items are not covered by the warranty. NOTE The accessories supplied with your product may vary depending on the model. Product specifications or contents in this manual may be changed without prior notice due to upgrade of product functions.

  • Page 7: Optional Accessories

    ASSEMBLING AND PREPARING Optional Accessories Without prior notice, optional accessories are subject to change to improve the performance of the product, and new accessories may be added. The illustrations in this manual may differ from the actual product and accessories. Stand kit 42VS20 47VS20 55VS20 42VX30MS 47VX30AS 47VX30AF Stand Stand Stand Screws Screws Screws Speaker kit Cable holder/ Speaker Screws/ Cable Cable Tie NOTE Cable holder/Cable tie may not be available in some areas or for some models. Optional accessories are not included for all models.

  • Page 8: Parts And Buttons

    ASSEMBLING AND PREPARING Parts and buttons 42VS20 42VX30MS Power Indicator LED On : Power is on LED Off: Power is off Screen Buttons Screen Marks RGB/AV DVI IN DVI OUT AUDIO SPEAKER /COMPONENT OUT RGB/AV /COMPONENT IN Connection panel Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. Adjust the up and down. Adjusts the volume level. AUTO/SET Displays the current signal and mode. Press this button to adjust the screen automatically (available only in RGB mode) Turns the power on or off. / I IR Receiver This is where the unit receives signals from the remote control. Power Indicator This Indicator lights up blue when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. NOTE You can set the Power indicator to on or off by selecting OPTION in the main menu.
  • Page 9 ASSEMBLING AND PREPARING 47VS20 47VX30AS 55VS20 Power Indicator LED On : Power is on LED Off: Power is off Screen Buttons Screen Marks RGB/AV DVI IN DVI OUT AUDIO SPEAKER /COMPONENT OUT RGB/AV /COMPONENT IN Connection panel Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. Adjust the up and down. Adjusts the volume level. AUTO/SET Displays the current signal and mode. Press this button to adjust the screen automatically (available only in RGB mode) Turns the power on or off. / I IR Receiver This is where the unit receives signals from the remote control. Power Indicator This Indicator lights up blue when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber.
  • Page 10 ASSEMBLING AND PREPARING 47VX30AF Power Indicator LED On : Power is on LED Off: Power is off Receiver FFC Screen Buttons Screen Marks RGB/AV DVI IN DVI OUT AUDIO SPEAKER /COMPONENT OUT RGB/AV /COMPONENT IN Connection panel Screen Marks Description INPUT Changes the input source. MENU Accesses the main menus, or saves your input and exits the menus. Adjust the up and down. Adjusts the volume level. AUTO/SET Displays the current signal and mode. Press this button to adjust the screen automatically (available only in RGB mode) Turns the power on or off. / I IR Receiver This is where the unit receives signals from the remote control. Power Indicator This Indicator lights up blue when the display operates normally(on mode). If the display is in sleep (Energy Saving) mode, this indicator color changes to amber. NOTE You can set the Power indicator to on or off by selecting OPTION in the main menu.

  • Page 11: Connecting The Stand

    ASSEMBLING AND PREPARING Connecting the stand 47VS20 47VX30AS 47VX30AF - Only on some models. 42VS20 42VX30MS Place a soft cloth on the table and put the - Only on some models. product with the screen facing downward. Place a soft cloth on the table and put the product with the screen facing downward. Use the screws to secure the stand on the rear side of the product as shown in the diagram. Use the screws to secure the stand on the rear side of the product as shown in the diagram.
  • Page 12 ASSEMBLING AND PREPARING 55VS20 - Only on some models. Place a soft cloth on the table and put the product with the screen facing downward. Use the screws to secure the stand on the rear side of the product as shown in the diagram.

  • Page 13: Connecting The Speakers

    ASSEMBLING AND PREPARING Connecting the Speakers 55VS20 - Only on some models. 42VS20 47VS20 42VX30MS Connect the input signal cable to the Monitor 47VX30AS 47VX30AF before installing the speakers. Use a cable tie to organize the cables. - Only on some models. Connect the input signal cable to the Monitor before installing the speakers. Use a cable tie to organize the cables. Mount the speaker by using a screw as shown in the following. Then connect the speaker cable. Mount the speaker by using a screw as shown in the following. Then connect the speaker cable. After installing your speakers, use holders and cable ties to organize the speaker cables. After installing your speakers, use holders and cable ties to organize the speaker cables. NOTE Connect the speaker terminals noting the correct polarity. To ensure the best sound quality and minimize noise, keep the cable as short as possible as shown in the figure.

  • Page 14: Portrait Layout

    ASSEMBLING AND PREPARING Portrait Layout Using the FFC/IR PCB (Only for 47VX30AF model) - Only on some models. 47VX30AF When installing in a Portrait Layout, rotate the monitor clockwise 90 degrees (when facing the screen). Remove the securing tape first. Do not pull out the FFC, as this may cause Using the Kensington security system damage. The Kensington security system connector is Be careful not to damage the product during located at the back of the Monitor set. For more installation. information of installation and using, refer to the manual supplied with the Kensington security system or visit http://www.kensington.com . Connect the Kensington security system cable between the Monitor set and a table. NOTE The Kensington security system is optional. You can obtain additional accessories from most electronics stores.

  • Page 15: Mounting On A Wall

    ASSEMBLING AND PREPARING Mounting on a wall CAUTION Disconnect the power cord first, and then For proper ventilation, allow a clearance of 10 move or install the Monitor set. Otherwise cm on each side and from the wall. Detailed electric shock may occur. installation instructions are available from your If you install the Monitor set on a ceiling or dealer, see the optional Tilt Wall Mounting Bracket slanted wall, it may fall and result in severe Installation and Setup Guide. injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. D o not over tighten the screws as this may 10 cm cause damage to the Monitor set and void your warranty. U se the screws and wall mounts that meet the VESA standard. Any damages or injuries 10 cm by misuse or using an improper accessory are not covered by the warranty. 10 cm 10 cm 10 cm NOTE If you intend to mount the Monitor to a wall, attach Use the screws that are listed on the VESA Wall mounting interface (optional parts) to the back of the set. standard screw specifications. When you install the Monitor using the wall The wall mount kit includes an installation mounting interface (optional parts), attach it manual and necessary parts.

  • Page 16: Remote Control

    REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons of the remote control. Please read this manual carefully and use the Monitor set correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching and ends to the label inside the compartment, and close the battery cover. To remove the batteries, perform the installation actions in reverse. CAUTION Do not mix old and new batteries, as this may damage the remote control. Make sure to point the remote control to the remote control sensor on the Monitor set. POWER POWER MONITOR MONITOR MONITOR ENERGY ENERGY INPUT INPUT SAVING SAVING . , ! . , ! PQRS PQRS WXYZ WXYZ 1/a/A 1/a/A CLEAR CLEAR - * # - * # MARK MARK...
  • Page 17 USING THE MONITOR SET POWER MONITOR ENERGY INPUT SAVING . , ! PQRS WXYZ 1/a/A CLEAR - * # MARK BRIGHT NESS POWER MUTE MENU MENU AUTO AUTO S.MENU S.MENU BACK BACK TILE TILE EXIT EXIT ENERGY INPUT MONITOR SAVING . , ! MENU (See p.41) PQRS WXYZ...

  • Page 18: Using The Monitor Set

    USING THE MONITOR SET USING THE MONITOR SET Connecting to a PC RGB connection Transmits the analog video signal from your PC to Your Monitor set supports the Plug & Play* feature. the Monitor set. Connect the PC and the Monitor set with the 15 pin signal cable as shown the * Plug & Play: A PC will have a built-in driver for following illustrations. the monitor, no extra software is needed. Select RGB input. Back of the product. RGB/AV /COMPONENT OUT AUDIO RGB/AV /COMPONENT IN NOTE Macintosh Adapter It is recommended to use the Monitor set (not included) with the HDMI connection for the best image quality. Use a shielded signal interface cable, such as D-sub 15 pin signal cable and DVI/HDMI (not included) cable, with a ferrite core to maintain standard compliance for the product. If you turn the Monitor set on when the set becomes cold, the screen may flicker. This is normal. Some red, green, or blue spots may appear on the screen. This is normal. PC/MAC CAUTION Connect the signal input cable and tighten NOTE it by turning the screws Use the standard...

  • Page 19: Dvi Connection

    USING THE MONITOR SET DVI connection HDMI connection Transmits the digital video signal from your PC to Transmits the digital video and audio signals from the Monitor set. Connect the PC and the Monitor your PC to the Monitor set. Connect the PC and set with the DVI cable as shown the following the Monitor set with the HDMI cable as shown in illustrations. the following illustrations. Select DVI input. Select HDMI input. Back of the product. Back of the product. AUDIO DVI IN AUDIO DVI IN AUDIO (not included) (not included) (not included) NOTE Use a High Speed HDMI™ Cable. Please check the PC environment if you cannot hear the sound in HDMI mode. Some PCs require you to manually change the default audio output to HDMI. If you want to use HDMI-PC mode, you must set the input label to PC mode. When HDMI PC is used, a compatiblity problem might occur.

  • Page 20: Dp Connection

    USING THE MONITOR SET DP connection Transmits the digital video and audio signals from your PC to the Monitor set. Connect the PC and the Monitor set with the DP cable as shown in the following illustrations. Select DP input. Back of the product. (not included) NOTE Sound may not be available depending on the DP version of your PC.

  • Page 21: Adjusting The Screen

    USING THE MONITOR SET Adjusting the screen Customizing image options Customize basic and advanced options of each Selecting an image mode image mode for the best screen performance. Display images in its optimized settings by Press MENU to access the main menus. selecting one of the preset image modes. Press the Navigation buttons to scroll to Press MENU to access the main menus. PICTURE and press OK. Press the Navigation buttons to scroll to Press the Navigation buttons to scroll to PICTURE and press OK. Picture Mode and press OK. Press the Navigation buttons to scroll to Press the Navigation buttons to scroll to an Picture Mode and press OK. image mode you want and press OK. Press the Navigation buttons to scroll to an Select and adjust following options, and then image mode you want and press OK. press OK. Mode Description Option Description Vivid Adjusts the video image for the retail Backlight A djusts the brightness of the screen environment by enhancing the contrast, by controlling the LCD backlight. If brightness, Colour, and sharpness. you decrease the brightness level, the screen becomes darker and the Standard Adjusts the image for the normal power consumption will be reduced environment.

  • Page 22: Customizing Pc Display Options

    USING THE MONITOR SET Adjusting the sound Customizing PC display options Customize options of each image mode for the Selecting an sound mode best image quality. Play the sound in its optimized settings by This function works in the following mode: selecting one of the preset sound modes. RGB[PC] mode. Press MENU to access the main menus. Press MENU to access the main menus. Press the Navigation buttons to scroll to Press the Navigation buttons to scroll to AUDIO and press OK. PICTURE and press OK. Press the Navigation buttons to scroll to Sound Press the Navigation buttons to scroll to Mode and press OK. Screen and press OK. Press the Navigation buttons to scroll to a Select and adjust following options, and then sound mode you want and press OK. press OK. Option Description Mode Description Resolution Selects a proper resolution. See Standard Select when you want standard-quality “Customizing PC display options”. sound. Auto Sets to adjust the screen position, clock, Music Select when you listen to music. Config. and phase automatically. Cinema Select when you watch movies.

  • Page 23: Customizing Sound Options

    AUDIO and press OK. Press the Navigation buttons to scroll to Sound Mode and press OK. CAUTION Press the Navigation buttons to scroll to a If a fixed image displays on the screen for a sound mode you want and press OK. long period of time, it will be imprinted and become a permanent disfigurement on the Select and adjust following options, and then screen. This is “image burn” or “burn-in” and press OK. not covered by the warranty. If the aspect ratio is set to 4:3 for a long period of time, image burn may occur on the letterboxed area of the screen. Option Description Infinite LG's Infinity Sound option provides Sound 5.1 channel stereo sound from two speakers. Treble Controls the dominant sounds in the NOTE output. When you turn up the treble, it will increase the output to the lower You can also change the image size by frequency range. accessing the main menus. Bass Makes the output sound softer. If the bass is increased, the frequency of the output also increases. Reset Resets the sound mode to the default MODE AV Component RGB...
  • Page 24 USING THE MONITOR SET - 16:9 : This selection will allow you to adjust the - 4:3 : This selection will allow you to view a picture horizontally, in linear proportion, to fill the picture with an original 4:3 aspect ratio, black entire screen(useful for viewing 4:3 formatted bars will appear on both the left and right of the DVDs). screen. - Just Scan : This Selection will allow you view - Zoom : This selection will allow you to view the the picture of best quality without loss of original picture without any alteration, while filling the picture in high resolution image. Note: If there is entire screen. However, the top and bottom of noise in original Picture, You can see the noise the picture will be cropped. at the edge. Just Scan - 1:1 : The aspect ratio is not adjusted from the - Cinema Zoom : Choose Cinema Zoom when original. (Only Display Port PC, HDMI PC, you want to enlarge the picture in correct DVI-D PC, RGB PC) proportion. Note: When enlarging or reducing the picture, the image may become distorted.

  • Page 25: Using The Input List

    USING THE MONITOR SET Using the input list Selecting an input source Press INPUT to access the input source list. Press the Navigation buttons to scroll to one of the input sources and press OK. Input source Description AV(CVBS) Watch video from a VCR or other external devices. Component Watch the contents in a DVD or other extemal devices, or through a digital set-top box View a PC display on the screen Display Port View a PC display on the screen DVI-D View a PC display on the screen HDMI Watch contents in a PC, DVD of Digital set-top box other high definition devices...

  • Page 26: Entertainment

    ENTERTAINMENT ENTERTAINMENT Connecting to a wired network To set up the network seetings: (Even if your dis- play has already connected automatically, running setup again will not harm anything), (Depending on model) Press MENU to access the main menus. Press the Navigation buttons to scroll to NET- Connect the display to a local area network (LAN) WORK and press OK. via the LAN port as shown on the following illustra- tion and set up the network settings. Press the Navigation buttons to select Net- Only supports wired network connection. work Setting and press OK. After making a physical connection, a small If you already set Network Setting, select number of home networks may require the display Resetting. The new connection settings resets network settings to be adjusted. For most home the current network settings. networks, the display will connect to automatically without any adjustments. Select IP Auto Setting or IP Manual Setting. For detail information, contact your internet pro- - If selecting IP Manual Setting, press the vider or router manual. Navigation and Number buttons. IP address- es will need to be input manually. - IP Auto Setting: Select this if there is a DHCP server (Router) on the local area net- work (LAN) via wired connection, the display will automatically be allocated an IP address. If you’re using a broadband router or broad- band modem that has a DHCP (Dynamic Host Configuration Protocol) server function. The IP address will automatically be deter- Router mined. When you are finished, press EXIT.

  • Page 27: Network Status

    Tips for Network setting Use a standard LAN cable with this display. Cat5 or better with a RJ45 connector. Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the display to the home network, quickly power off and/or discon- nect the power cable of the home network router or cable modem. Then power on and/or Network Status connect the power cable again. Depending on the internet service provider (ISP), the number of devices that can receive Press MENU to access the main menus. internet service may be limited by the applica- Press the Navigation buttons to scroll to NET- ble terms of service. For details, contact your WORK and press OK. ISP. LG is not responsible for any malfunction of the Press the Navigation buttons to select Net- display and/or the internet connection feature work Status. due to communication errors/malfunctions as- Press OK to check the network status. sociated with your internet connection, or other connected equipment. When you are finished, press EXIT. LG is not responsible for problems within your internet connection. You may experience undesired results if the network connection speed does not meet the requirements of the content being accessed. Option Description Some internet connection operations may not Setting Return to the network setting menu. Test the current network status after set-...

  • Page 28: Connecting Usb Storage Devices

    ENTERTAINMENT Connecting USB storage devices Tips for using USB storage devices Only a USB storage device is recognizable. Connect USB storage devices such as a USB If the USB storage device is connected flash memory, external hard drive to the display through a USB hub, the device is not recog- and use multimedia features (See "Browsing files" nizable. on page 28). A USB storage device using an automatic Connect a USB flash memory or USB memory recognition programme may not be recog- card reader to the Display as shown on the follow- ing illustration. The My media screen appears. nized. A USB storage device which uses its own driver may not be recognized. The recognition speed of a USB storage device may depend on each device. Please do not turn off the display or unplug the USB device when the connected USB storage device is working. When such device is suddenly separated or unplugged, the stored files or the USB storage device may be damaged. Please do not connect the USB storage device which was artificially maneuvered on the PC. The device may cause the product to malfunction or fail to be played. Never forget to use only a USB storage device which has normal music files, image files or movie files. Please use only a USB storage device which was formatted as a FAT32 file system, NTFS file system provided with the Windows op- erating system. In case of a storage device formatted as a different utility programme CAUTION which is not supported by Windows, it may not be recognized.

  • Page 29: Browsing Files

    ENTERTAINMENT If the USB HDD does not have an external Browsing files power source, the USB device may not be Access the photo, music, or movie lists and browse detected. So be sure to connect the external files. power source. - Please use a power adaptor for an external Connect a USB storage device. power source. We do not guarantee an USB Press MENU to access the main menus. cable for an external power source. If your USB memory device has multiple Press the Navigation buttons to scroll to My Media and press OK. partitions, or if you use a USB multi-card reader, you can use up to 4 partitions or USB Press the Navigation buttons to choose memory devices. from Movie List, Photo List, Music List or If a USB memory device is connected to a Contents List and press OK. USB multi-card reader, its volume data may not be detected. If the USB memory device does not work properly, disconnect and reconnect it. Movie List Photo List Music List Contents List How fast a USB memory device is detected differs from device to device. If the USB is connected in Standby Mode, specific hard disk will automatically be Page 1/1 Photo List loaded when the display is turned on. USB External Drive1 Page 1/1 The recommended capacity is 1 TB or less for a USB external hard disk and 32 GB or...
  • Page 30 ENTERTAINMENT Supported file format Type Supported file format Music Movie DAT,MPG,MPEG,VOB,AVI,DIVX,MP4,MKV,TS,T Bit rate 32 to 320 RP,TP,ASF,WMV,FLV) y Sampling rate MPEG1 Layer3 : 32 kHz, 44.1 kHz, 48 kHz Movie(*.mpg/*.mpeg/*dat/*.ts/*.trp/*.tp/*.vob/*. y Sampling rate MPEG2 Layer3 : 16 kHz, 22.05 mp4/*.mov/*.mkv/*.divx/*.avi/*.asf/*.wmv/*.flv/*. kHz, 24 kHz avi(motion-jpeg)/*. y Sampling rate MPEG2.5 Layer3 : 8 kHz, mp4(motion-jpeg)/*.mkv(motion-jpeg))supporting 11.025 kHz, 12 kHz file Content File Extensions : *.cts/ *.cse Video format : DivX3.11, DivX4.12, DivX5.x, (when Movie DivX6, Xvid1.00, Xvid1.01, Xvid1.02, Xvid1.03, using File Extensions: *.mpg/*.mpeg/*.dat/*.ts/*. Xvid1.10 beta-1/beta-2, SuperSign trp/*.tp/*.vob/*.mp4/*.mov/*.mkv/*.avi/*.asf/*. Manager) Mpeg-1, Mpeg-2, Mpeg-4, H.264/AVC, VC1, wmv/*.avi(motion JPEG)/*.mp4(motion JPEG)/*. JPEG, Sorenson H.263 mkv(motion JPEG) Audio format : Dolby Digital, AAC, Mpeg, MP3, Video format: MPEG1, MPEG2, MPEG4,H.264/ LPCM, HE-AAC, ADPCM, WMA AVC, DivX 3.11, DivX 4.12, DivX 5.x, DivX 6,...

  • Page 31: Viewing Movies

    ENTERTAINMENT Viewing movies Play a movie. Play video files on display. Your display shows all NOTE of the video files saved in a USB storage device or shared folder on a PC. Non-supported files are displayed the preview image by icon only Press the Navigation buttons to scroll to My Abnormal files are displayed in the form of bitmap Media and press OK. Press the Navigation buttons to scroll to Movie List and press OK. Press the Navigation buttons to scroll to a Control playback by using the following buttons. folder you want and press OK. Press the Navigation buttons to scroll to a file you want and press OK. 01:02:30 / 02:30:25 Page 1/1 Movie List MENU Option Hide Exit Drive1 Page 1/1 USB1 USB Drive Button Description Stops the playback Move Play Page Change...
  • Page 32 ENTERTAINMENT Tips for using playing video files When you are watching the movie by Movie List function, you can adjust an image by Some user-created subtitles may not work Energy Saving key on the remote control. properly. User setup for each image mode does not Some special characters are not supported operate. in subtitles. HTML tags are not supported in subtitles. Subtitles in languages other than the sup- ported languages are not available. The screen may suffer temporary interrup- Video options tions (image stoppage, faster playback, etc.) when the audio language is changed. Press MENU to access the Pop-Up menus. A damaged movie file may not be played Press the Navigation buttons to scroll to Set correctly, or some player functions may not Video Play., Set Video. or Set Audio. and be usable. press OK. Movie files produced with some encoders may not be played correctly. If the video and audio structure of recorded file is not interleaved, either video or audio is NOTE outputted. HD videos with a maximum of Option values changed in Movie List does 1920x1080@25/30P or 1280x720@50/60P not affect Photo List and Music List. are supported, depending on the frame. Option value changed in Photo List and Mu- Videos with resolutions higher than sic List are changed likewise in Photo List and Music List excluding Movie List. 1920X1080@25/30P or 1280x720@50/60P When replaying the video file after stopping, may not work properly depending on the...
  • Page 33 ENTERTAINMENT When you select the Set Video Play,, Repeat Turn on/off repeat function of movie playback. When turned on, the Press the Navigation buttons to scroll to show file within the folder will be played the Picture Size, Audio Language, Subtitle back repeatedly. Even when the Language or Repeat. repeated playback is turned off, it can run the playback if Press the Navigation buttons to scroll to make the file name is similar to the previous file. appropriate adjustments. Menu Description Code Page Support Language Picture Size Selects your desired picture Latin1 English, Spanish, French, format during movie play. German, Italian, Swedish, Finnish, Dutch, Portuguese, Danish, Roma- Audio Changes the Language Group of the Language nian, Norwegian, Albanian, Gaelic, audio during movie play. Files Welsh, Irish, Catalan,Valencian with a single audio track cannot be selected. Latin2 Bosnian, Polish, Croatian, Czech, Slovak, Slovenian, Serbian, Subtitle Turn on/off the subtitle. Language Hungarian Latin4...

  • Page 34: Viewing Photos

    ENTERTAINMENT When you select the Set Video,, Page 1/1 Photo List USB1 USB Drive Drive1 Page 1/1 Press the Navigation buttons to scroll to make appropriate adjustments. When you select the Set Audio,, Move View Page Change Change Numbers Exit To Music List Mark Mode Press the Navigation buttons to scroll to show Page 1/1 the Sound Mode, Clear Voice II or Balance. Photo List Mark Mode USB1 USB Drive Drive1 Page 1/1 Press the Navigation buttons to scroll to make appropriate adjustments. Move Mark Page Change Exit View Marked Mark All Unmark All Exit Mark Mode Viewing photos View image files saved in a USB storage device. Menu Description The displays on the screen may differ from the View Marked Display the selected photo file.
  • Page 35 ENTERTAINMENT Using photo options ENERGY Press the ENERGY SAVING button SAVING( repeatedly to change the brightness of your screen. Use the following options while viewing photos. Option y Slide Speed: Selects a slideshow speed (Fast, Medium, Slow). y TransitionEffect: Set the view mode of the slideshow. y BGM: Selects a music folder for the background music. NOTE You cannot change the music folder while the background music is playing. You can only select the MP3 2/13 folder saved on the device that currently displays the photo. Hide MENU Option Exit Slideshow Options Number of selected photos Hide Hides the option window.
  • Page 36 ENTERTAINMENT When you select the Set Photo View, Press the Navigation buttons to scroll to select Slide Speed,Transition Effect or BGM. Press the Navigation buttons to scroll to make appropriate adjustments. Transition Effect Option Option Description Sliding Pushes the current slide out of view as it plays to the next slide. Stairs Pushes the current slide in a staircase shape as it plays to the next slide. Door Open Pushes the current slide like opening or closing the door as it plays to the next slide. /Close Shutter Pushes the current slide like drawing or pulling down the blind as it plays to the next slide Fade In Fades the slide out slowly before playing to the next slide.

  • Page 37: Listening To Music

    ENTERTAINMENT Listening to music When you select the Set Photo View, Press the Navigation buttons to scroll to select Slide Speed or BGM.. Press the Navigation buttons to scroll to My Me- Press the Navigation buttons to scroll to make dia and press OK. appropriate adjustments. Press the Navigation buttons to scroll to Music List and press OK. Press the Navigation buttons to scroll to a folder you want and press OK. When you select the Set Video, Press the Navigation buttons to scroll to a file Press the Navigation buttons to scroll to make you want and press OK. appropriate adjustments. Page 1/1 Music List USB1 USB Drive Drive1 Page 1/1 001. - B01.mp3 002. -B02.mp3 003. B03.mp3 004. - B04.mp3 00:00 00:00 00:00 00:00 When you select the Set Audio, 005. - B05.mp3 00:00 Press the Navigation buttons to scroll to show...
  • Page 38 ENTERTAINMENT Tips for playing music files Control playback by using the following buttons. This unit cannot support the ID3 Tag embedded MP3 files. Page 1/1 Music List 3 file(s) Marked Drive1 Page 1/1 NOTE 004. - B04.mp3 005. - B05.mp3 006. - B06.mp3 007. - B07.mp3 008. - B08.mp3 00:00 00:00 00:00 00:00 00:00 005. - B05.mp3 02:30 / 03:25 Non-supported files are displayed the pre- MENU Option Hide Exit Play with Photo view image by icon only Abnormal files are displayed in the form of bitmap Button Description A damaged or corrupted music does not play Stops playing back the file and moves back to the music list. but displays 00:00 in playtime. Plays a music file A music downloaded from a paid service with Pauses or resumes playback copyright protection does not start but dis- plays inappropriate information in playtime.

  • Page 39: Viewing The Contents List

    ENTERTAINMENT Viewing the Contents List Music options Press MENU to access the Pop-Up menus. Plays back the stored files using the Export option in SuperSign Manager. Press the Navigation buttons to scroll to Set Au- dio Play. or Set Audio. and press OK. Press the Navigation buttons to scroll to My Media and press OK. Press the Navigation buttons to scroll to Con- NOTE tents List and press OK. Option values changed in Movie List does Press the Navigation buttons to scroll to a not affect Photo List and Music List. folder you want and press OK. Option value changed in Photo List and Mu- sic List are changed likewise in Photo List Press the Navigation buttons to scroll to a file and Music List excluding Movie List. you want and press OK. Page 1/1 When you select the Set Audio Play., Contents List USB1 USB Drive Drive1 Page 1/1 test1.cts test2.cts...

  • Page 40: Divx® Vod Guide

    ENTERTAINMENT DivX® VOD Guide DivX® VOD Deregistration You should deregister your device with 8 digit DivX deregistration code from your device at www.divx. com/vod. DivX® VOD Registration In order to play purchased or rented DivX® VOD contents, you should register your device with 10 Press MENU to access the main menus. digit DivX registration code from your device at Press the Navigation buttons to scroll to www.divx.com/vod. MEDIA and press OK. Press the Blue button. Press MENU to access the main menus. Press the Navigation buttons to scroll to Deacti- Press the Navigation buttons to scroll to MY vation and press OK. MEDIA and press OK. Press the Navigation buttons to select Yes to Press the Blue button. confirm. Press the Navigation buttons to scroll to DivX Reg. Code and press OK. Deregistration code : ******** View the registration code of your display.

  • Page 41: Using Pip/Pbp

    ENTERTAINMENT Using PIP/PBP Select the PIP or PBP icon from the play list. Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub screens. (See p.50) Press the MENU button to move to OPTION and press OK. Press PIP/PBP to select PIP or PBP and then 01:02:30 / 02:30:25 press OK. MENU Option Hide Exit < Movie List > PIP/PBP Prev. Move Mode Off Position PIP Size PBP Select Movie List or Photo List from My Media. (With PIP/PBP selected, the Music List and Contents List are deactivated.) 2/13 MENU Option Hide Exit Slideshow < Photo List > Movie List Photo List Music List Contents List Select either Main or Sub for sound. You must to select the output sound before running the...

  • Page 42: Customizing Settings

    CUSTOMIZING SETTINGS CUSTOMIZING SETTINGS Accessing main menus MARK BRIGHT NESS Press MENU to access the main menus. MUTE AUTO S.MENU MENU Press the Navigation buttons to scroll to one of the following menus and press OK. BACK EXIT TILE Press the Navigation buttons to scroll to the setting or option you want and press OK. When you are finished, press EXIT. When you return to the previous menu, press BACK. PICTURE (See p.42) AUDIO (See p.45) Adjusts the image size, Adjusts the sound quality, quality, or effect. effect, or volume level. TIME (See p.46) Sets the time, date, or Timer feature. PICTURE AUDIO TIME MY MIDIA (See p.27) OPTION (See p.47) Display and play movie, Customizes the general photo and music content settings. OPTION NETWORK MY MEDIA stored on your USB NETWORK (See p.52)

  • Page 43: Picture Settings

    CUSTOMIZING SETTINGS PICTURE settings PICTURE Move • Aspect Ratio : 16:9 ꔋ Press MENU to access the main menus. • Energy Saving : Off • Smart Energy Saving : Off Press the Navigation buttons to scroll to PICTURE and • Picture Mode : Standard press OK. • Backlight • Contrast Press the Navigation buttons to scroll to the setting or • Brightness option you want and press OK. • Sharpness • Color - To return to the previous level, press BACK. • Tint When you are finished, press EXIT. • Color Temp. • Advanced Control When you return to the previous menu, press • Picture Reset BACK. • Screen The available picture settings are described in the following: Setting Description Aspect Ratio Changes the image size to view images at its optimal size (See p.22). Energy Sets to automatically adjust the screen brightness corresponding to the surroundings. Saving Level Disables Energy Saving function.
  • Page 44 CUSTOMIZING SETTINGS Setting Description SCREEN Customizes the PC display options in RGB mode. (In RGB Option Mode Only) Resolution Selects a proper resolution. See “Customizing PC display options”. Auto Configure Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Position/Size/ Adjusts the options when the picture is not clear, especially when characters are Phase shaky, after the auto configuration. Reset Restores the options to the default setting. Picture Mode options Setting Description Backlight A djusts the brightness of the screen by controlling the LCD backlight. If you decrease the brightness level, the screen becomes darker and the power consumption will be reduced without any video signal loss. Contrast Increases or decreases the gradient of the video signal. You may use Contrast when the bright part of the picture is saturated. Brightness Adjusts the base level of the signal in the picture. You may use Brightness when the dark part of the picture is saturated. Sharpness Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Color Adjusts intensity of all colors. Tint Adjusts the balance between red and green levels.
  • Page 45 CUSTOMIZING SETTINGS Advanced Control Setting Description Dynamic Adjusts the contrast to keep it at the best level according to the brightness of the screen. The Contrast picture is improved by making bright parts brighter and dark parts darker. (Function works in the (Off/High/ following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV) Medium/Low) Dynamic Color Adjusts screen Colors so that they look livelier, richer and clearer. This feature enhances (Off/High/Low) hue, saturation and luminance so that red, blue, green and white look more vivid. (Function works in the following mode - AV(CVBS), Component, HDMI-DTV, Display Port-DTV) Clear White Make the white area of screen brighter and more white. (Off/High/Low) Skin Color It detects the skin area of video and adjusts it to express a natural skin color. (-5 to 5) Noise educes screen noise without compromising video quality. (Function works in the following mode - Reduction AV(CVBS), Component, HDMI-DTV, Display Port-DTV) (Off/High/ Medium/Low) Digital Noise This option reduces the noise produced while creating digital video signals. Reduction (Off/High/ Medium/Low) Gamma Set your own gamma value. On the monitor, high gamma values display whitish images and low (High/Medium/ gamma values display high contrast images. Low) Black Level Low: The picture of the screen gets darker. (High/Low) High: The picture of the screen gets brighter.

  • Page 46: Audio Settings

    Sound Mode The best sound tone quality will be selected automatically depending on the video type that you're currently watching. Mode Standard The most commanding and natural audio. Music Select this option to enjoy the original sound when listening to the music. Cinema Select this option to enjoy sublime sound. Sport Select this option to watch sports broadcasting. Game To enjoy dynamic sound when playing a game. NOTE If sound quality or volume is not at the level you want, it is recommended to use a separate home theater system or amplifier to cope with different user environments. Option Infinite Sound LG's Infinity Sound option provides 5.1 channel stereo sound from two speakers. Treble Controls the dominant sounds in the output. When you turn up the treble, it will increase the output to the higher frequency range. Bass Makes the output sound softer. When you turn up the bass, it will increase the output to the lower Frequency. Reset Resets the sound mode to the default setting. Digital Audio HDMI/Display Port: Outputs the sound of digital signal from HDMI and display ports through the Input monitor speaker. Audio In: Outputs the sound through the monitor speaker by connecting HDMI and display ports to the Audio In port. Speaker ON: Enables sound to the monitor speaker. (* The monitor speaker is sold separately.) OFF: Disables sound to the monitor speaker. Use this option when using an external sound device.

  • Page 47: Time Settings

    CUSTOMIZING SETTINGS TIME settings TIME Move • Clock ꔋ Press MENU to access the main menus. • Off Time : Off • On Time : Off Press the Navigation buttons to scroll to TIME and press • Sleep Timer : Off • Power On Delay : Off • Auto Off : On Press the Navigation buttons to scroll to the setting or option • Automatic Standby : On you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT. When you return to the previous menu, press BACK. The available time settings are described in the following: Setting Description Clock Sets the time feature. On/Off Time Sets the time to turn on or off the Monitor set. Sleep Timer Sets the length of time until the Monitor set to turns off. When you turn the Monitor set off and turn it on again, the Sleep Timer will be set to off. Power on delay When connecting multiple monitors and turning the power on, the monitors are turned on individually to prevent overload. Auto off If Auto off is active and there is no input signal, the set switches to off mode automatically after 15 minutes. Automatic If you do not use the monitor for more than 4 hours, it will be in standby mode automatically.

  • Page 48: Option Settings

    CUSTOMIZING SETTINGS OPTION settings OPTION Move • Language ꔋ Press MENU to access the main menus. • Power Indicator • ISM Method : Normal Press the Navigation buttons to scroll to OPTION and press • DPM Select : On • Fail Over : Off • Factory Reset Press the Navigation buttons to scroll to the setting or option • Set ID you want and press OK. • Tile Mode • PIP/PBP - To return to the previous level, press BACK. • Key Lock : Off When you are finished, press EXIT. • Product/Service Info. • Portrait Mode When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Description Language To choose the language in which the control names are displayed. Power Indicator Use this function to set the power indicator on the front side of the product to On or Off. ISM Method A frozen or still picture from a PC/Video game displayed on the screen for prolonged periods could result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the screen for a long period of time. Setting Normal Leave on normal if you don't foresee image burn in being a problem.
  • Page 49 CUSTOMIZING SETTINGS Setting Description Tile Mode Tile Mode To use this function - Must be displayed with various other products. - Must be in a function that can be connected to RGB Cable by distributor and RS-232C. Tile mode and choose Tile alignment and set the ID of the current product to set location. * Only after pressing the SET button the adjustments made to the settings will be saved. - Tile mode : column x row ( c = 1 to 15 r = 1 to 15) - 15 x 15 available. - Configuration of an integration screen is also available as well as configuration of One by one Display. Auto Config. Sets to adjust the screen position, clock, and phase automatically. The displayed image may be unstable for a few seconds while the configuration is in progress. Position Moving the screen position horizontally and vertically. Size Adjust the horizontal and vertical size of the screen taking into account the size of the bezel. Natural The image is omitted by the distance between the screens to be naturally shown. Reset Function to initialize and release Tile. All Tile setting are released when selecting Tile recall and the screen returns to Full screen. PIP/PBP Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub screens. Option Mode Sets the type of secondary screen. *OFF: Disables the secondary screen. *PIP (Picture In Picture): Displays the secondary screen in the main screen.
  • Page 50 CUSTOMIZING SETTINGS Tile Mode This monitor can be tiled with additional monitors to create a large tiled display. When using 2 monitors When using 4 monitors When using 9 monitors When the Tile Mode option is disabled ID 2 ID 2 ID 3 ID 2 ID 1 ID 1 ID 1 ID 4 ID 6 ID 5 ID 3 ID 4 Tile ID ID 9 ID 8 ID 7 When using 16 monitors When using 25 monitors ID 3 ID 4 ID 5 ID 1 ID 2 ID 1 ID 3 ID 4 ID 2 ID 8 ID 9 ID 10 ID 6 ID 7 ID 6 ID 5 ID 7...
  • Page 51 CUSTOMIZING SETTINGS PIP/PBP Displays videos or photos stored in the USB device on a single monitor by dividing it into the main and sub screens. (See p.40) Mode NOTE *PIP(Picture In Picture): Displays the Sub screen in the main screen. The subscreen is only supported when using the USB device. *PBP(Picture By Picture): Displays the Sub screen next to the main screen. Component Main screen screen Main HDMI/DVI-D/Display Port You can only change the size and position in PIP mode. With PBP selected, the Aspect Ratio option in the Position PICTURE menu is disabled (Fixed as 16:9). While running the PBP function, the Tile Mode function Adjusts the position of the subscreen (top left, does not work. bottom left, top right, bottom right) You must select the output sound before running the PIP or PBP functions. (Select either Main or Sub.) If you fail to select Main or Sub from the sound selection box, and if the OSD disappears after either a period of time or when the Exit or Back key is pressed, the PIP/PBP subscreen is not top left top right activated. You cannot change the sound while running the PIP or PBP functions. If you want to change the sound, please restart PIP/PBP. The picture quality of the subscreen is set according to the values selected in the main menu, not the USB device.

  • Page 52: Picture Id

    CUSTOMIZING SETTINGS Picture ID Picture ID is used to change the settings of a If you press the left/right buttons or press the specific display using a single IR receiver for ON button repeatedly, the Picture ID cycles multi-vision. The set receiving the IR signal through OFF and 0 to 4. Assign the ID you communicates with another set via an RS232 want. connection. Each set is identified by a Set ID. If you assign the Picture ID using the remote control, Picture ID only displays with the same Picture ID and Set ID can be controlled remotely. POWER POWER ◀ ▶ ENERGY INPUT ENERGY INPUT MONITOR MONITOR Close IR Receiver IR Receiver SAVING SAVING . , ! . , ! If you assign the Set ID to each set with RS232C RS232C multi-vision, and then assign the Picture ID...

  • Page 53: Network Settings

    CUSTOMIZING SETTINGS NETWORK settings NETWORK Move • Player Name ꔋ Press MENU to access the main menus. • Network Setting : Wired • Network Status : Not connected Press the Navigation buttons to scroll to NETWORK and • Server IP Setting press OK. • Server IP Status : Not connected Press the Navigation buttons to scroll to the setting or option you want and press OK. - To return to the previous level, press BACK. When you are finished, press EXIT. When you return to the previous menu, press BACK. The available option settings are described in the following: Setting Description Player Name Sets the player name used in SuperSign Manager.(Up to 20 characters) Network Setting Configure the network settings. Network Status Display the network status. - Internet is connected : Extermally connected - Home network is connected : Only internally connected - Not connected : When there is no network connection Server IP Setting Sets the IP address of the computer (server) on which SuperSign Manager is installed. Server IP Status Displays the connection status with the server. - Not connected : When there is no network connection with SuperSign server - Waiting for approval : When network connection with SuperSign server has been made, but access to server has not been approved by the server - Rejected : When network connection with SuperSign server has been made, but access to server has been rejected by the server - Internet is connected : When network connection with SuperSign server has been made and...

  • Page 54: Making Connections

    MAKING CONNECTIONS MAKING CONNECTIONS Connect various external devices to the ports on the Monitor set’s back panel. Find an external device you want to connect to your Monitor set shown on the following illustration. Check the connection type of the external device. Go to the appropriate illustration and check the connection details. HD Receiver HDMI - See p.54 HDMI - See p.54 AV(CVBS) DVI - See p.54 DVI - See p.54 - See p.55 AV(CVBS) - See p.55 AV(CVBS) - See p.55 Component Component - See p.55 Component - See p.55 - See p.55 Speaker Memory storage – See p.27 Gaming device Camcorder/Camera HDMI - See p.18 HDMI - See p.54 HDMI - See p.54 DVI - See p.18 DVI - See p.54 AV(CVBS) RGB - See p.17 AV(CVBS) - See p.55 - See p.55 LAN - See p.56 Component - See p.55 Component Display Port - See p.19 - See p.55 NOTE If you connect a gaming device to the Monitor set, use the cable supplied with the gaming device. It is recommended you to use the optional speaker provided.

  • Page 55: Connecting To A Hd Receiver, Dvd, Camcorder, Camera, Gaming Device Or Vcr Player

    MAKING CONNECTIONS Connecting to a HD receiver, HDMI connection DVD, Camcorder, Camera, Transmits the digital video and audio signals from Gaming Device or VCR player an external device to the Monitor set. Connect the external device and the Monitor set with the HDMI Connect a HD receiver, DVD, or VCR player to the cable as shown on the following illustration. Monitor set and select an appropriate input mode. Back of the product. DVI connection RGB/AV DVI IN AUDIO /COMPONENT OUT RGB/AV Transmits the digital video signal from an external /COMPONENT IN device to the Monitor set. Connect the external device and the Monitor set with the DVI cable as shown in the following illustration. To transmit an audio signal, connect an optional audio cable. (not included) Back of the product. RGB/AV DVI IN AUDIO /COMPONENT OUT RGB/AV /COMPONENT IN (not included) (not included) NOTE Use a High Speed HDMI™ Cable.

  • Page 56: Component Connection

    MAKING CONNECTIONS Component connection AV(CVBS) connection Transmits the analog video and audio signals from Transmits the analog video and audio signals from an external device to the Monitor set. Connect the an external device to the Monitor set. Connect the external device and the Monitor set with the 15 external device and the Monitor set with the 15 pin signal to RCA cable as shown on the following pin signal to RCA cable as shown on the following illustration. To display images by using progressive illustration. scan, make sure to use the component cable. Back of the product. Back of the product. RGB/AV RGB/AV AUDIO AUDIO /COMPONENT OUT /COMPONENT OUT RGB/AV RGB/AV AUDIO AUDIO /COMPONENT OUT /COMPONENT OUT RGB/AV RGB/AV /COMPONENT IN /COMPONENT IN RGB/AV RGB/AV /COMPONENT IN /COMPONENT IN (not included)

  • Page 57: Connecting To The Lan

    MAKING CONNECTIONS Connecting to the LAN Connecting to a USB Connect a USB storage device such as s USB LAN connection flash memory, external hard drive, MP3 player or a USB memory card reader to the Monitor set and access the USB menu to use various multimedia files. Using a router(Switch) Switch Monitor Set Network Using the Internet. Network Monitor Set...

  • Page 58: Daisy Chain Monitors

    MAKING CONNECTIONS Daisy Chain Monitors Use this function to share the RGB video signal with other monitors without having to use a separate signal splitter box. • T o use different products connected to each other Connect one end of the signal input cable (15-pin D-Sub Signal Cable) to the RGB OUT connector of product 1 and connect the other end to the RGB IN connector of other products RGB Cable RGB/AV RGB/AV RGB/AV RGB/AV 15-pin D-Sub Signal Cable /COMPONENT OUT /COMPONENT OUT /COMPONENT OUT /COMPONENT OUT (Max 3m) RGB/AV RGB/AV RGB/AV RGB/AV /COMPONENT IN /COMPONENT IN /COMPONENT IN /COMPONENT IN RGB/AV RGB/AV RGB/AV RGB/AV /COMPONENT OUT /COMPONENT OUT /COMPONENT OUT...

  • Page 59: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING No image is displayed Problem Resolution Is the product power cord y S ee if the power cord is properly connected to the outlet. connected? Is the power indicator light on? y See if the power switch is turned on. y May need service. P ower is on, power indicator y Adjust brightness and contrast again. is blue but the screen appears y Backlight may need repair. extremely dark. The power indicator amber? y I f the product is in power saving mode, move the mouse or press any key. y Turn both devices off and then back on. D oes the 'Out of range' y T he signal from the PC (video card) is out of the vertical or horizontal message appear? frequency range of the product. Adjust the frequency range by referring to the Specifications in this manual.
  • Page 60 TROUBLESHOOTING 'Key Lock On' message appears. Problem Resolution The 'Key Lock On' message y The Lock function prevents the OSD settings from being changed appears when pressing the inadvertently. To release the lock, go to Menu and Option and disable Menu button. the Key Lock option. The screen image looks abnormal. Problem Resolution Is the screen position wrong? y D-Sub analog signal - Press the "AUTO" button in the remote control to automatically select the optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Position OSD menu. y See if the video card resolution and frequency are supported by the product. If the frequency is out of range, set to the recommended resolution in the Control Panel "Display" Setting menu. Do thin lines appear on the y D -Sub analog signal - Press the "AUTO" button in the remote control background screen? to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Clock OSD menu. Horizontal noise appears or the y D-Sub analog signal - Press the "AUTO" button in the remote control characters look blurred. to automatically select an optimal screen status that fits into the current mode. If adjustment is not satisfactory, use the Phase OSD menu. The screen is displayed y T he proper input signal is not connected to the signal port. Connect abnormally.
  • Page 61 TROUBLESHOOTING The audio function does not work. Problem Resolution No sound? y See if the audio cable is connected properly. y Adjust the volume. y S ee if the sound is set properly. Sound is too dull. y Select the appropriate equalize sound. Sound is too low. y A djust the volume. Screen color is abnormal. Problem Resolution Screen has poor color resolution y S et the number of colors to more than 24 bits (true color) Select (16 colors). Control Panel - Display - Settings - Color Table menu in Windows. S creen color is unstable or y Check the connection status of the signal cable. Or, re-insert the PC mono-colored. video card. Do black spots appear on the y S everal pixels (red, green, white or black color) may appear on the screen? screen, which can be attributable to the unique characteristics of the LCD panel. It is not a malfunction of the LCD.

  • Page 62: Specifications

    SPECIFICATIONS SPECIFICATIONS 42VS20 42VX30MS LCD Panel Screen Type 42" class (42.0" / 106,7 cm diagonal) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1067.31 mm Pixel Pitch 0.4845 mm (H) x 0.4845 mm (V) Video Signal Max. Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI/DP : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI/DP : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI/DVI/DP : 30 kHz to 83 kHz Vertical Frequency RGB : 56 Hz to 75 Hz HDMI/DVI/DP : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite Sync, Digital Input Connector 15-pin D-Sub type, HDMI (digital), RS-232C, LAN, DVI, Display port, USB Power Rated Voltage AC 100-240 V~ 50/60 Hz 2.2 A Power Consumption On Mode : 170 W Typ. Sleep Mode : ≤ 1 W Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C conditions...
  • Page 63 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 967 mm x 561 mm x 125 mm / 17.5 kg 967 mm x 633 mm x 259 mm / 18.8 kg 967 mm x 561 mm x 126.5 mm / 18.25 kg 967 mm x 633 mm x 259 mm / 19.55 kg * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 64 SPECIFICATIONS 47VS20 47VX30AS LCD Panel Screen Type 47" class (46.9" / 119,2 cm diagonal) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.87 mm Pixel Pitch 0.5415 mm (H) x 0.5415 mm (V) Video Signal Max. Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI/DP : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI/DP : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI/DVI/DP : 30 kHz to 83 kHz Vertical Frequency RGB : 56 Hz to 75 Hz HDMI/DVI/DP : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite Sync, Digital Input Connector 15-pin D-Sub type, HDMI (digital), RS-232C, LAN, DVI, Display port, USB Power Rated Voltage AC 100-240 V~ 50/60 Hz 3.0 A Power Consumption On Mode : 180 W Typ. Sleep Mode : ≤ 1 W Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C...
  • Page 65 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 1079.5 mm x 624.6 mm x 122.9 mm / 22.2 kg 1079.5 mm x 697.7 mm x 298.3 mm / 23.6 kg 1079.5 mm x 624.6 mm x 129.2 mm / 23.0 kg 1079.5 mm x 697.7 mm x 298.3 mm / 24.4 kg * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 66 SPECIFICATIONS 47VX30AF LCD Panel Screen Type 47" class (46.9" / 119,2 cm diagonal) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1192.87 mm Pixel Pitch 0.5415 mm (H) x 0.5415 mm (V) Video Signal Max. Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI/DP : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI/DP : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI/DVI/DP : 30 kHz to 83 kHz Vertical Frequency RGB : 56 Hz to 75 Hz HDMI/DVI/DP : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite Sync, Digital Input Connector 15-pin D-Sub type, HDMI (digital), RS-232C, LAN, DVI, Display port, USB Power Rated Voltage AC 100-240 V~ 50/60 Hz 3.0 A Power Consumption On Mode : 180 W Typ. Sleep Mode : ≤ 1 W Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C conditions Operating Humidity 10 % to 80 %...
  • Page 67 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 1079.1 mm x 624.2 mm x 116.3 mm / 22.4 kg 1079.1 mm x 697.5 mm x 298.3 mm / 23.8 kg 1079.1 mm x 697.5 mm x 122.6 mm / 23.2 kg 1079.1 mm x 697.5 mm x 298.3 mm / 24.6 kg * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 68 SPECIFICATIONS 55VS20 LCD Panel Screen Type 55" class (54.6" / 138,7 cm diagonal) TFT (Thin Film Transistor) LCD (Liquid Crystal Display) Panel. Visible diagonal size : 1387.80 mm Pixel Pitch 0.630 mm (H) x 0.630 mm (V) Video Signal Max. Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI/DP : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Recommended Resolution RGB : 1920 x 1080 @ 60 Hz HDMI/DVI/DP : 1920 x 1080 @ 60 Hz - It may not be supported depending on the OS or video card type. Horizontal Frequency RGB : 30 kHz to 83 kHz HDMI/DVI/DP : 30 kHz to 83 kHz Vertical Frequency RGB : 56 Hz to 75 Hz HDMI/DVI/DP : 56 Hz to 60 Hz Synchronization Type Separate Sync, Composite Sync, Digital Input Connector 15-pin D-Sub type, HDMI (digital), RS-232C, LAN, DVI, Display port, USB Power Rated Voltage AC 100-240 V~ 50/60 Hz 3.3 A Power Consumption On Mode : 260 W Typ. Sleep Mode : ≤ 1 W Off Mode : ≤ 0.5 W Environmental Operating Temperature 0 °C to 40 °C conditions Operating Humidity 10 % to 80 %...
  • Page 69 SPECIFICATIONS Dimensions (Width x Height x Depth) / Weight 1251 mm x 722 mm x 104 mm / 34.5 kg 1251 mm x 795 mm x 298 mm / 35.9 kg 1251 mm x 722 mm x 104 mm / 35.2 kg 1251 mm x 795 mm x 298 mm / 36.6 kg * Applicable only for models that support the speakers Audio RMS Audio Output 10 W + 10 W (R + L) Input Sensitivity 0.7 Vrms Speaker Impedance 8 Ω Product specifications shown above may be changed without prior notice due to upgrade of product functions.
  • Page 70 SPECIFICATIONS DTV Mode RGB (PC) supported mode HDMI/DVI Horizontal Vertical Resolution Component Resolution (DTV) Frequency(kHz) Frequency(Hz) 480i 31.469 70.8 640 x 350 576i 31.468 70.8 720 x 400 480p 31.469 59.94 640 x 480 576p 37.5 640 x 480 720p 37.879 60.317 800 x 600 1080i 46.875 800 x 600 1080p 49.725 74.55 832 x 624 48.363 1024 x 768 60.123 75.029 1024 x 768...

  • Page 71: Ir Codes

    IR CODES IR CODES All models do not support the HDMI/USB function. Code (Hexa) Function Note Energy Saving ( R/C BUTTON R/C BUTTON (ON/OFF) POWER INPUT R/C BUTTON Monitor On R/C BUTTON Monitor Off R/C BUTTON MENU R/C BUTTON Up ( ) R/C BUTTON Down ( ) R/C BUTTON Left ( ) R/C BUTTON Right ( ) R/C BUTTON OK( ) R/C BUTTON R/C BUTTON BACK( EXIT R/C BUTTON R/C BUTTON R/C BUTTON Volume R/C BUTTON Volume MUTE...

  • Page 72: Controlling The Multiple Product

    CONTROLLING THE MULTIPLE PRODUCT CONTROLLING THE MULTIPLE PRODUCT Use this method to connect several products to a single PC. You can control several products at a time by connecting them to a single PC. In the Option menu, Set ID must be between 1 and 99 without being duplicated. Connecting the cable Connect the RS-232C cable as shown in the picture. The RS-232C protocol is used for communication between the PC and product. You can turn the product on/off, select an input source or adjust the OSD menu from your PC. RS-232C Cable (not included) Monitor 1 Monitor 2 Monitor 3 Monitor 4 RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) 3-Wire Configurations (Not Standard) Set Set D-Sub 9 D-Sub 9 D-Sub 9 D-Sub 9 (Female) (Female) (Female) (Female) NOTE When using 3-wire connections (non-standard), an IR daisy chain cannot be used. Communication Parameter Baud Rate : 9600 buad Rate (UART) Data Length : 8 bit Parity Bit : None Stop Bit : 1bit Flow Control : None Communication Code : ASCII code Use a crossed (reverse) cable...

  • Page 73: Command Reference List

    CONTROLLING THE MULTIPLE PRODUCT Command reference list COMMAND DATA (Hexadecimal) 01. Power 00H to 01H 02. Input Select Refer to ‘02. Input Select’ 03. Aspect Ratio Refer to ‘03. Aspect Ratio’ 04. Energy Saving Refer to ‘04. Energy Saving’ 05. Picture mode 00H to 04H 06. Contrast 00H to 64H 07. Brightness 00H to 64H 08. Sharpness 00H to 64H 09. Color 00H to 64H 10. Tint 00H to 64H 11. Color Temperature 00H to 64H 12. H Position 00H to 64H 13. V Position 23H to 41H 14. H Size 00H to 64H 15. Auto configuration 16. Balance 00H to 64H 17. Sound mode 01H to 05H 18. Treble 00H to 64H 19. Bass 00H to 64H 20. Speaker...
  • Page 74 CONTROLLING THE MULTIPLE PRODUCT COMMAND DATA (Hexadecimal) 39. Tile ID Refer to ‘39. Tile ID’ 40. Tile H Position 00H to 64H 41. Tile V Position 23H to 41H 42. Tile H Size 00H to 32H 43. Tile V Size 00H to 32H 44. Natural Mode (In Tile mode) 00H to 01H 45. DPM Select 00H to 01H 46. Remote Lock/ key Lock 00H to 01H 47. Key Refer to ‘47. Key’ 48. OSD Select 00H to 01H 49. Elapsed time return 50. Serial No. Check 51. S/W Version Note : During USB operations such as Dvix or EMF, all commands except Power(ka) and Key(mc) are not executed and treated as NG.

  • Page 75: Transmission / Receiving Protocol

    CONTROLLING THE MULTIPLE PRODUCT Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] or [Command1][Command2][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] * [Command1]: First command to control the set. * [Command2]: Second command to control the set. * [Set ID]: S et ID with which you want to communicate. Etner [Set ID] = ‘00(0x00’ to communicate with all sets regardless of their Set ID numbers. * [Data]: Information passed to the set. * [Data1]: Information passed to the set. * [Data2]: Information passed to the set. * [Data3]: Information passed to the set. * [Cr]: Carriage Return. ASCII code ‘0x0D’. * [ ]: ASCII code space ‘0x20’ Acknowledgement [Command2][ ][Set ID][ ][OK/NG][Data][x] or [Command2][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] * In a like manner, if other functions transmit ‘FF’ data based on this format, Acknowledgement data feedback presents status about each function. * Note: In this mode, display will send the acknowledgement after power on processing completion. There might be a time delay between command and acknowledgement. * Refer to ‘Real data mapping’ for hexadecimal data to decimal data. * No acknowledgement signal will be sent from display, if Set ID in transmission signal is set to ‘00’(=0x00).
  • Page 76 CONTROLLING THE MULTIPLE PRODUCT 01. Power (Command: k a) 04. Energy Saving (Command: j q) To control power On/Off the display. To control the energy saving function. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [j][q][ ][Set ID][ ][Data][Cr] Data 00 : Power Off Data 00: Off 01 : Power On 01: Minimum FF : Check status 02: Medium 03. Maximum Acknowledgement 05. Screen Off [a][ ][Set ID][ ][OK/NG][Data][x] * I n a like manner, if other functions transmit ‘FF’ Acknowledgement data based on this format, Acknowledgement data [q][ ][Set ID][ ][OK/NG][Data][x] feedback presents status about each function. * N ote: In this modes, display will send the acknowledgement after power on processing completion. There might be a time delay between command and acknowledgement. * T here might be some time delays between command and acknowledgement. 05. Picture Mode (Command: d x) To select the picture mode. 02. Input Select (Command: x b) Transmission To select input source for display.
  • Page 77 CONTROLLING THE MULTIPLE PRODUCT 07. Brightness (Command: k h) 10. Tint (Command: k j) (Video Timing only) To adjust screen brightness. To adjust screen tint. Transmission Transmission [k][h][ ][Set ID][ ][Data][Cr] [k][j][ ][Set ID][ ][Data][Cr] Data 00 to 64: Brightness 0 to 100 Data 00 to 64: Tint 0 to 100(R50 to G50) Acknowledgement Acknowledgement [h][ ][Set ID][ ][OK/NG][Data][x] [j][ ][Set ID][ ][OK/NG][Data][x] 08. Sharpness (Command: k k) (Video Timing only) 11. Color Temperature (Command: x u) To adjust screen sharpness. To adjust color temperature. Transmission Transmission [k][k][ ][Set ID][ ][Data][Cr] [x][u][ ][Set ID][ ][Data][Cr] Data 00 to 64: Sharpness 0 to 100 Data 00 to 64: Warm 50 to Cool 50 Acknowledgement Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] [u][ ][Set ID][ ][OK/NG][Data][x] 09. Color (Command: k i) (Video Timing only) 12. H Position (Command: f q) To adjust screen color. To set the Horizontal position. * Only available for Tile Off mode. Transmission Transmission [k][i][ ][Set ID][ ][Data][Cr] [f][q][ ][Set ID][ ][Data][Cr] Data 00 to 64: Color 0 to 100...
  • Page 78 CONTROLLING THE MULTIPLE PRODUCT 13. V Position (Command: f r) 16. Balance (Command: k t) To set the Vertical position. To adjust balance. * Only available for Tile Off mode. Transmission Transmission [k][t][ ][Set ID][ ][Data][Cr] [f][r][ ][Set ID][ ][Data][Cr] Data 00 to 64: Left 50 to Right 50 Data 00 to 64: Bottom Min. -50 to Top Max. 50 * T he operational range varies depending on the Acknowledgement RGB input resolution. [t][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [r][ ][Set ID][ ][OK/NG][Data][x] 17. Sound Mode (Command: d y) 14. H Size (Command: f s) To select the sound mode. To set the Horizontal size. Transmission * Only available for Tile Off mode. [d][y][ ][Set ID][ ][Data][x] Transmission Data 01: Standard [f][s][ ][Set ID][ ][Data][Cr] 02: Music Data 00 to 64: Size -50 to 50 03: Cinema 04: Sport Acknowledgement 05. Game [s][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 79 CONTROLLING THE MULTIPLE PRODUCT 19. Bass (Command: k s) 22. Volume Control (Command: k f) To adjust bass. To adjust volume. Transmission Transmission [k][s][ ][Set ID][ ][Data][Cr] [k][f][ ][Set ID][ ][Data][Cr] Data 00 to 64: Bass 0 to 100 Data 00 to 64: Volume 0 to 100 Acknowledgement Acknowledgement [f][ ][Set ID][ ][OK/NG][Data][x] [s][ ][Set ID][ ][OK/NG][Data][x] 23. Time 1(Year/ Month/ Day) (Command: f a) 20. Speaker (Command: d v) To set the Time 1(Year/ Month/ Day) values. To select speaker on/off. Transmission Transmission [f][a][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [d][v][ ][Set ID][ ][Data][x] Data 1 00 to 14: 2010 to 2030 Data 00: Speaker Off Data 2 01 to 0C: January to December 01: Speaker On Data 3 01 to 1F: 1 to 31 * Enter “fa [Set ID] ff” for checking Time 1 values. Acknowledgement [v][ ][Set ID][ ][OK/NG][Data][x Acknowledgement [a][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 24. Time 2(Hour/ Minute/ Second) (Command: f x) 21. Volume Mute (Command: k e) To set the Time 2(Hour/ Minute/ Second) values. To select screen mute on/off. Transmission Transmission [f][x][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [k][e][ ][Set ID][ ][Data][Cr]...

  • Page 80: Acknowledgement [H][ ][Set Id][ ][Ok/Ng][Data][X]

    CONTROLLING THE MULTIPLE PRODUCT 25. Off Timer(Repeat Mode/ Time) (Command: f e) 27. On Timer Input (Command: f u) To set the Off Timer(Repeat mode/ Time) function. To set the On Timer Input function. Transmission Transmission [f][e][ ][Set ID][ ][Data1][ ][Data2][ ][Data3][Cr] [f][u][ ][Set ID][ ][Data][Cr] Data1 00: Repeat Off Data 20: AV 01: Repeat Once 40: Component 02. Repeat Daily 60. RGB 03: Repeat from Monday to Friday 90: HDMI 04: Repeat from Monday to Saturday 70: DVI 05: Repeat from Saturday to Sunday C0: DISPLAY PORT 06. Repeat on Sunday * Check if Time1 and Time2 and On Timer(Repeat Data2 01 to 17: 00 to 23 Hours Mode/Time) functions have been set before setting Data3 01 to 3B: 00 to 59 Minutes this function. * Enter “fe [Set ID] ff” for checking Off Timer(Repeat mode/ Time) values. Acknowledgement * Check if Time1 and Time2 have been set before [u][ ][Set ID][ ][OK/NG][Data][x] setting this function. Acknowledgement [e][ ][Set ID][ ][OK/NG][Data1][Data2][Data3][x] 28. Sleep Time (Command: f f) To set sleep time. 26. On Timer(Repeat Mode/ Time) (Command: f d) Transmission To set the On Timer(Repeat mode/ Time) function. [f][f][ ][Set ID][ ][Data][Cr] Transmission Data 00: Off...

  • Page 81: Acknowledgement [I][ ][Set Id][ ][Ok/Ng][Data][X]

    CONTROLLING THE MULTIPLE PRODUCT 30. 4 Hours Off (Command: m n) 33. Power Indicator(Standby Light) (Command: f o) To set the 4 Hours Off function. To set the Power Indicator(Standby Light) function. Transmission Transmission [m][n][ ][Set ID][ ][Data][Cr] [f][o][ ][Set ID][ ][Data][Cr] Data 00: 4 Hours Off Off Data 00: Standby Light Off 01: 4 Hours Off On 01: Standby Light On Acknowledgement Acknowledgement [n][ ][Set ID][ ][OK/NG][Data][x] [o][ ][Set ID][ ][OK/NG][Data][x] 31. Auto Off (Command: f g) To set the Auto Off function. Transmission [f][g][ ][Set ID][ ][Data][Cr] 34. Power Indicator(Power Light) (Command: f p) Data 00: Auto Off Off To set the Power Indicator(Power Light) function. 01: Auto Off On Transmission [f][p][ ][Set ID][ ][Data][Cr] Acknowledgement Data 00: Power Light Off [g][ ][Set ID][ ][OK/NG][Data][x] 01: Power Light On Acknowledgement [p][ ][Set ID][ ][OK/NG][Data][x] 32. Language (Command: f i) To set language for OSD. Transmission [f][i][ ][Set ID][ ][Data][Cr] Data 00: Czech 01: Danish...
  • Page 82 CONTROLLING THE MULTIPLE PRODUCT 36. Reset (Command: f k) 39. Tile ID (Command: d i) To execute the Picture, Screen, Audio and Factory To set Tile ID. reset function. Transmission Transmission [d][i][ ][Set ID][ ][Data][x] [f][k][ ][Set ID][ ][Data][Cr] Data 01 to E1: Tile ID 01 to 225** Data 00: Picture Reset FF: Read Tile ID 01: Screen Reset ** Data could not be set over (Tile Row) x (Tile 02: Audio Reset Column) 03: Factory Reset Acknowledgement [i][ ][Set ID][ ][OK/NG][Data][x] Acknowledgement [k][ ][Set ID][ ][OK/NG][Data][x] *NG will be return if data is over (Tile Row) x (Tile Column), except 0xFF. 37. Tile Mode (Command: d d) To select a Tile Mode Off/ On and Tile Row/ Column size. 40. Tile H Position (Command: d e) Transmission To set the Tile Horizontal position. *Only available when Tile Natural Mode is off. [d][d][ ][Set ID][ ][Data][Cr] Transmission Data 00 to FF: 1st byte - Tile Column value 2 nd byte - Tile Row value [d][e][ ][Set ID][ ][Data][Cr] *00, 01, 10, 11 means Tile Mode Off.

  • Page 83: Acknowledgement [J][ ][Set Id][ ][Ok/Ng][Data][X]

    CONTROLLING THE MULTIPLE PRODUCT 42. Tile H Size (Command: d g) 45. DPM Select (Command: f j) To set the Tile Horizontal Size. To set the DPM (Display Power Management) *Set Tile H Position to 0x32 (50) before setting Tile H function. Size. Transmission *Only available when Tile Natural Mode is off. [f][j][ ][Set ID][ ][Data][x] Transmission Data 00: DPM Select Off [d][g][ ][Set ID][ ][Data][x] 01: DPM Select On Data 00 to 32: 0 to 50 Acknowledgement Acknowledgement [j][ ][Set ID][ ][OK/NG][Data][x] [g][ ][Set ID][ ][OK/NG][Data][x] 46. Remote Controller Lock/ Key Lock (Command: k m) To lock the remote control and the front panel control keys on the display. Transmission [k][m][ ][Set ID][ ][Data][Cr] 43. Tile V Size (Command: d h) Data 00: Lock off To set the Tile Vertical size. 01: Lock on *Set Tile V Position to 0x00 before setting Tile V * If you are intended not to use the remote controller Size. and front panel control keys on the display for kind of *Only available when Tile Natural Mode is off. reasons, use this mode. Remote controller Lock/ Key Transmission Lock will be released automatically after display is [d][h][ ][Set ID][ ][Data][x] rebooted.
  • Page 84 CONTROLLING THE MULTIPLE PRODUCT 48. OSD Select (Command: k l) 51. S/W Version (Command: f z) To select OSD(On Screen Display) on/off To read the software version. Transmission Transmission [k][l][ ][Set ID][ ][Data][Cr] [f][z][ ][Set ID][ ][Data][Cr] Data 00: OSD Off Data FF: Data should be always ff in hexadecimal. 01: OSD On Acknowledgement Acknowledgement [z][ ][Set ID][ ][OK/NG][Data][x] [l][ ][Set ID][ ][OK/NG][Data][x] 49. Elapsed time return (Command: d l) To read the panel used time. Transmission [d][l][ ][Set ID][ ][Data][x] Data FF: Data should be always ff in hexadecimal. Acknowledgement [l][ ][Set ID][ ][OK/NG][Data][x] * Returned data means used hours in hexadecimal. 50. Serial No.Check (Command: f y) To read the serial numbers. Transmission [f][y][ ][Set ID][ ][Data][Cr] Data FF: Data should be always ff in hexadecimal. Acknowledgement [y][ ][Set ID][ ][OK/NG][Data][x]...
  • Page 85 NOTE ENERGY STAR(EPA) can not be supported in 47VX30AF model. ENERGY STAR(EPA) support 42/47/55VS20 42VX30MS 47VX30AS 47VX30AF Make sure to read the Safety Precautions E N E RGY STA R i s a s et of p owe r- before using the product. saving guidelines issued by the U.S.
  • Page 86 P/NO : 3840TRL098E (0801-REV00)

This manual is also suitable for:

42vs2055vs2042vx30ms47vx30as47vx30af47vs20-baa ... Show all

Table of Contents