Midi (Mpu401 ) Setup - M-Audio DMAN Manual

Digital audio card

Hide thumbs Also See for DMAN:

Table of Contents

Windows 3.1x Driver Setup - With PnP

For PnP systems, the Base I/O address, IRQ, DMA playback and

capture channels are all determined through the PnP mechanism.

However, you may select the duplex mode from this dialog. For

more information regarding duplex modes, see the "Audio Setup

for Non-PnP Computers" section.

MIDI (MPU401 ) Setup

You may modify the Windows 3.1x MIDI driver settings through

the Drivers Applet. First you must select the driver to set up by

highlighting the "DMAN MPU 401" entry, then press the

"Setup" button. The driver setup dialog below will pop up.

Windows 3.1x MPU401 Driver Setup

You now have the option of modifying the following resource

settings:

Port - This sets the Base I/O Address of the MPU401 device.

Table of Contents