Appendix - Technical Specs - M-Audio DMAN Manual

Appendix - Technical Specs

Channel Volume Controls
Over a range of 64 dB:
Stereo Master Volume:
Stereo Aux In:
Stereo Line in:
Stereo Digital Audio:
Stereo Synth In:
Mono Mic-in:
External Audio Inputs
Mic Input Level:
Impedance:
Power supplied:
Line Input Level:
Impedance:
Aux Input Level:
Impedance:
External Audio Outputs
Output Type: Combined line/headphone out
Output Level: Line output/headphone:
Load Impedance: Line output:
Frequency Response: 20 Hz - 20 kHz (± 3 dB)
Dynamic Range: 80 dB, typical 85 dB
Signal to Noise Ratio Line output:
(SNR):
Total Harmonic Line output:
Distortion (THD):
Channel Separation: > 65 dB
Board Configuration
IRQ:
DMA:
CODEC Base Address:
MPU401 Base Address:
64 steps range
32 steps range
32 steps range
64 steps range
32 steps range
32 steps range
10 mV to 200 mV p-p max
600k ohms or 20k ohms
2.5V at 1 ma
2 V rms max
10k ohms
2 V rms max
10k ohms
>80 dB
<0.015% @ 1 kHz
5,7,9,11,12,15
0, 1, 3
120H - 3FCH in 4-byte increments
330H - 360H in 8-byte increments
51
1.5 V rms
32 ohms