Table of Contents
Advertisement
FUNCTION KEYS:
There are 5 function keys on the weather station:
Set key
In normal display mode, press and hold for 3 seconds to enter the manual setting mode for the following:
•
a. LCD contrast level
b. Time zone
c. Daylight saving time (on/ off)
d. Radio-controlled time reception (on/ off)
e. 12/ 24-hour display
f.
Time setting (hour and minute)
g. Calendar setting (year, month and day)
h. Temperature unit (°F/ °C) setting
i.
Re-learning/ removing channels
j.
Number of channels to be saved to memory
In view mode or alarm mode, press to go back to normal display mode
•
Plus (+) and Minus (–) key
In normal display mode, press to select a channel (the indoor sensor or one of the remote temperature/humidity
•
sensors)
Press to make adjustment (increase or decrease) in different manual settings and alarm setting
•
Mode key (MODE)
In normal display mode, press to toggle between the following view mode:
•
a.
Maximum record of a selected channel (the indoor sensor or one of the remote temperature/humidity sensors,
depending on the user's selection)
b.
Minimum record of a selected channel
c.
Average humidity and temperature readings of a selected channel (over the last 100 values stored in memory)
d.
The dew point temperature of a selected channel
e.
History readings in the memory of a selected channel
In alarm setting mode, press to activate/ deactivate the temperature and humidity alarm.
•
In manual setting mode, press to go back to normal display mode
•
Press and hold for 3 seconds to reset Min/ Max record of a particular channel
•
Press and hold for 5 seconds to reset Min/ Max record of all channels
•
SET key
Alarm key
Mode key
Minus key
Plus key
4
Hide quick links:
Advertisement
Table of Contents
