Table of Contents
Advertisement
IV. Function Key Layout
A. The below picture shows the four function keys used in programming
and operation of your indoor weather station
V. Program Mode
The program mode is laid out in a manner that allows you to program each
function separately, or you can follow the instructions entirely to program the
indoor weather center. Complete programming is usually done for the initial
set-up, and will require you to skip step 1,2 and 3 of each programming section.
The programming mode can be exited at any time by either pressing the "CH"
button, or waiting for the 15-second time-out to take effect.
A. Overview of programming mode sequence
1. LCD Contrast
4. Radio-controlled
Time ON/OFF
7. Minute
10. Date
13. Relative pressure
setting
B. LCD Contrast Setting
1. Press and hold the "SET" button for
five seconds.
2. "lcd" will appear at the top of the
display and a number will flash next to
it.
3. Press and release the "OUT/+" button
to select the desired LCD contrast
setting.
4. Press and release the "SET" button to confirm the LCD contrast
setting and continue to the Time Zone setting.
2. Time Zone
3. DST ON/OFF
5. 12/24-hour
6. Hour
time mode
8. Year
9. Month
11. °F/°C
12. inHg/hPa
14. Forecast
sensitivity
8
Advertisement
Table of Contents
