X-TREME XB-310Li Owner's Manual page 19

3) Keep the charger and battery away from water to
prevent electrical shock and shorting. The charger
is intended for indoor use only.
4) Plug the end of the charger's cord into the socket
of the adaptor first. Next connect the adaptor to
the XB-310Li (the charger port is located below the
front of the seat). Then plug the chargers' AC
cords into the wall outlet.
5) Read the charger label to learn about the charger
indicator lights, and their meanings.
6) Generally, a short drive will require a short time to
re-charge, and a long ride will require a longer
time. A complete (90%) discharge may require 6
hours to recharge. To prevent electrolysis (battery
fluid loss by hydrogen generation,) do not charge
for longer than eighteen hours.
Before riding the electric bike for the first time, you must
charge the batteries for 4-6 hours using the supplied
charger. To charge, pull the protective cover from the
charging sockets. Then plug the charger into the
charging sockets, and plug the chargers into a wall outlet.
Do not place the battery near heat or fire. Do not expose
the chargers to water.
WARNING
19