SATO /gt Series Programmer's Reference Manual page 58

Unit 4: Standard Command Codes
FORM OVERLAY, RECALL
FUNCTION To recall the label image from the form overlay memory for printing. Additional or
different data can be printed with the recalled image.
FORMAT
<ESC>/
Must be preceded by all other data and placed just before Print Quantity (<ESC>Q)
command.
EXAMPLE <ESC>A
<ESC>H01000<ESC>V0125
<ESC>STHIS IS THE STORED IMAGE WITH A BARCODE
<ESC>H0100<ESC>V0165<ESC>B103100*12345*
<ESC>&<ESC>Z
<ESC>A<ESC>H0100<ESC>V0050
<ESC>STHIS IS RECALLING AND ADDING TO THE STORED IMAGE<ESC>/
<ESC>Q1
<ESC>Z
OUTPUT
(4-11)
NOTES The overlay is stored using the Form Overlay Store (<ESC>&) command.
If this command is used with the Expanded Print Length (<ESC>EX0) command the
Form Overlay length cannot exceed 9999 dots.
Refer to Appendix: Reference Table 8 for additional information.
SATO E+ Programming Reference PN 9001149A Page 4-16