Troubleshooting; Led Diagnosis - Argox OS-214plus User Manual

13. After driver installation is complete, click "Close".
The driver should now be installed.
Installed printer Argox OS-2140 PPLA
55

Troubleshooting

Normally, when the printer is in not working properly, the "Power"
LED blinks continuously; while printing and communication
between the host and printer stops.

LED Diagnosis

Power and Ready LEDs blinking continuously indicates printer
errors. To understand the problem, please observe the Power and
Ready LEDs and refer to the following solutions:
LED Indicators: Power and Ready LEDs blink at the same tempo
Power LED Ready LED
ON ON
OFF OFF
Possible Problems Solutions
Miss-detect gap Check the label path
Check the label sensor
Label stock out Supply the label roll
Label stock not Install the label roll
installed
Label jam Recover the jam
56
Remarks
If you use a
continuous label roll
and run under
Windows, select
continuous media.