6. Secure the four screws attaching the cutter.
Cutter
7. Plug the cutter's connector into the PCB's header
connector (J9).
8. Reattach the print head assembly by securing the 4
screws.
9. Click back the middle cover.
10. Secure the two screws for the base housing.
11. Click the top cover into place.
83
Appendix II - Installing the Extension Card
Extension Card designated for all optional extension modules.
For example, RTC card and Add-on card.
Install the extension card into the printer as follows:
1. Turn off the printer power.
2. Remove the top cover.
3. Release the two screws at the bottom of the base housing.
84