SATO LM408 Operator's Manual page 56

MENU
ADVANCED MODE
CARD MODE
SERVICE MODE
COUNTERS MODE
COUNTERS
HD LIFE
HEAD COUNTER
XX.XM
LIFE COUNTER
XX.XM
HEAD COUNTER CLEAR
YES NO
LM408-412e Operator Manual
Unit 4: Printer Configuration
COUNTERS MODE (TABLE 4-9)
Is the first menu screen of the Advanced Mode. The Advanced Mode is provided to make basic
printer operational adjustments. Typically, once these adjustments or settings have been made,
they will not require additional address unless a new bob is downloaded.
Is only a transitional menu screen to access the Counters Mode.
The Card Mode allows the operator to manage or format the expanded memory card. Is only a
transitional menu screen to access the Counters Mode.
The Service Mode allows the programming of various dimensional settings, sensor thresholds,
and language options.
Is only a transitional menu screen to access the Counters Mode.
Is the first menu screen of the Counters Mode. The Counters Mode allows the printers various
internal counters to be reset to zero or to view count in meters printed thus far.
Allows the selection of which counter to be viewed and the reset of the print head counter (HD).
Is an informational screen that provides the printed length of media using the existing print head.
The head counter should be reset each time the print head is replaced.
Is an informational screen that provides the printed the length of media since printer setup.
Allows the determination of whether or not to reset the print head counter to zero.
DESCRIPTION
4-25
PN: 9001155A