Cleaning Direction; Product Specification; General Specification - Argox CP-2140 User Manual

Cleaning Direction

When cleaning the print head, always wipe in One-Way Direction
- from Left to Right only, or, from Right to Left only, to clean
"Heating Line" of print head gently without excessive stress.
Do not wipe back and forth, to avoid dust or dirt on cleaning cotton
would be attached onto print head again.
Special Caution:
Warranty of print heads will be void if print head serial number is
removed, altered, defected, or made illegible, under every
circumstance.
Compact Printer Series - User's Manual
61

6. Product Specification

General Specification

Specifications
Printing Method
Printing
203 dpi(8 dots/mm)
Resolution
Printing Speed 2~4ips (50.8~101.6mm/s)
Max 100"(2540mm)
Printing Length
Min 0.2"(5mm)
Printing Width
8MB DRAM (5MB user available)
Memory
4MB Flash ROM (2MB user available)
CPU Type
Media Reflective sensor x 1 (movable) &
Media Transmissive sensor x 1 (Center fixed) /
Sensors
Operation
LED indicator (Power/Ready)x 2, Button(Feed) x 1
Interface
CP-2140, CP-2140Z, CP-3140:
Communication Parallel, RS-232(Baud rate: 2400~115200 bps), USB
Interface CP-2140E, CP-3140E:
Ethernet, RS-232(Baud rate: 2400~115200 bps), USB
CP-2140, CP-2140E, CP-3140, CP-3140E: PPLA, PPLB
Emulation
CP-2140Z: PPLZ
Software -
Label editing
Compact Printer Series - User's Manual
CP-2140
CP-3140
CP-2140Z
CP-3140E
CP-2140E
Direct Thermal / Thermal Transfer
(12 dots/mm)
1~up to 4ips
(25.4~101.6
Max 50"(1270mm)
Min 0.2"(5mm)
Max 4.1"(104mm)
8MB DRAM
(5MB user
available)
8MB Flash ROM
(6MB user
available)
32 bit RISC microprocessor
Head open switch /
Ribbon end sensor
Seagull Driver, BarTender
62
300 dpi
mm/s)