Caring For Your Printer; Print Head Maintenance Guide; Cleaning Interval; Cleaning Material - Argox CP-2140 User Manual

12. After the related files have been copied to your system, click
"Finish".
13. After driver installation is complete, click "Close".
The driver should now be installed.
Compact Printer Series - User's Manual
59

5. Caring for Your Printer

Print Head Maintenance Guide

To keep the Print Head remain in the best conditions and
efficiency and to extend duration for use, regular cleaning action
is needed:
Note: Always switch off printer power before cleaning.
In case of long-time printing, surface of print head may be
very hot. Please wait till print head cools down properly
before maintenance, to prevent burns. During maintenance,
do not directly touch print head surface, to avoid its damage
and any possible injury to you. Use cleaning material instead.

Cleaning Interval

It's strongly recommended to regularly clean print heads at least
when changing every one label roll (in direct thermal printing
mode) or every one ribbon roll (in thermal transfer printing mode).
In addition, if printers are operated under critical applications and
environments, or if it's found that print quality is degraded, please
clean print heads more frequently.

Cleaning Material

Surface of print head's heating element is very fragile. To prevent
from any possible damage, please use soft cloth/ cotton buds with
"Ethanol" or "IPA" to clean print head surface.
It's strongly recommended to wear hand gloves during cleaning
progress.
Do not touch print head surface by bare hands or with any hard
equipment.
Water or spit should be kept away in case of corrosion on heating
elements.
Compact Printer Series - User's Manual
60