SATO CG4 Series Operator's Manual page 66

Section 6: General Specifications
MODEL NAME
MEDIA
(BE SURE TO USE MEDIA MANUFACTURED OR CERTIFIED BY SATO)
Type
Wind Direction
Roll and Core Diameter
Fanfold Max. stack height
Size
Thickness
Page 6-2
CG408 DT/ CG408TT
Direct Thermal / Thermal Transfer depending on print model (DT or TT)
Roll stock: Face In or Face out winding
Maximum outer diameter: 5.04" (128 mm) with Inner core diameter: 1.5" (40 mm)
* Inner core diameter: 0.75" (19.05 mm) with maximum outer diameter: 4.33" (110
mm) can be accepted, but there is no performance guarantee.
4.65" (118 mm) (external supply)
Label
Continuous Pitch: 0.27" to 11.8" (7 to 300 mm)
Pitch including liner: 0.39" to 11.93" (10 to 303 mm)
Width: 0.86" to 4.21" (22 to 107 mm)
Width including liner: 0.98" to 4.33" (25 to 110 mm)
Cutter Pitch: 0.87" to 11.8" (22 to 300 mm)
Pitch including liner: 0.98" to 11.93" (25 to 303 mm)
Width: 0.87" to 4.21" (22 to 107 mm)
Width including liner: 0.98" to 4.33" (25 to 110 mm)
Dispenser Pitch: 0.87" to 3.93" (22 to 100 mm)
Pitch including liner: 0.98" to 4.05" (25 to 103 mm)
Width: 0.87" to 4.21" (22 to 107 mm)
Width including liner: 0.98" to 4.33" (25 to 110 mm)
Tear-off
Pitch: 0.87" to 11.8" (22 to 300 mm) *
Pitch including liner: 0.98" to 11.93" (25 to 303 mm)
Width: 0.87" to 4.21" (22 to 107 mm)
Width including liner: 0.98" to 4.33" (25 to 110 mm)
Linerless
Pitch: 0.98" to 3.93" (25 to 100 mm) *
With: 0.98" to 4.33" (25 to 110 mm)
Non-adhesive paper
Continuous
Pitch: 0.39" to 11.93" (10 to 303 mm) *
Width: 0.98" to 4.33" (25 to 110 mm)
Cutter Pitch: 0.98" to 11.93" (25 to 303 mm)
Width: 0.98" to 4.33" (25 to 110 mm)
Tear-off
Pitch: 0.98" to 11.93" (25 to 303 mm) *
Width: 0.98" to 4.33" (25 to 110 mm)
1
* When using media with small pitch, you must tear it by hand.
• The above size may be limited by use conditions, such as type of paper, usage
environment, and application.
• When using the dispenser mode, restrictions apply to the maximum paper length
according to paper installation conditions.
0.0024" to 0.0074" (0.06 to 0.19 mm)
CG412 DT/ CG412TT
Roll stock or Fan-fold
1
1
1
1
CG4 Series Operator Manual