Sangean RCR-22 User Manual page 19

Snooze
. When the alarm sounds, press any button other than the Standby
button will silence the alarm for 5 minutes. "
the display.
2. To adjust the silence time for the snooze timer, press the Menu
button to enter the menu setting.
3. Press the Tuning up/down until "SNOOZE X" shown on the
display, then press the Band/Select button to enter the setting.
Press the Tuning up/down button to adjust the silence time. There
are 5, 0, 5 and 20 minutes for the snooze timer. Press the
Band/Select to confirm the setting.
4. To cancel the snooze timer while the alarm is suspended, press
the Standby button.
Sleep timer - radio auto shut off
Your radio can be set to turn off automatically after a preset time
has elapsed. The Sleep Timer setting can be adjusted between
5,30, 45, 60, 90 and 20 minutes.
. Press and hold the Standby button to enter the Sleep Timer
setting. "SLEEP XX" will show on the display.
2. Keep holding the Standby button and the Sleep Timer options
will start switching on the display. Stop until the desired Sleep
Timer setting appears on the display. The setting will be saved
and the LCD will return to normal display.
8
' will appear on