Sangean RCR-22 User Manual page 18

4. Press the Tuning up/down to choose the required alarm type, and
then press the Band/Select button to confirm the setting. The alarm
can be set to buzzer, FM or AM. When radio mode is selected,
the radio frequency and the preset number on the display will
begin to flash. Press the Tuning up/down to adjust the required
radio frequency or the required preset number for the radio alarm,
then press the Band/ Select button to confirm the setting.
5. Press the Tuning up/down to select the required alarm volume
and press the Band/Select button to confirm the setting. The alarm
has now been set. Symbol for active alarm (such as
is shown on the display.
When the alarm sounds
When the buzzer alarm activates, the alarm will start softly and
gradually increase in level. It will sound for  minute and silence
for  minute in repetition for 60 minutes unless cancelled. When
the other alarm types are set, the radio will sound non-stop at the
selected time for up to 60 minutes.
When the radio alarm is activated, the alarm will go off in Humane
Waking System. It will increase its volume in 0.5increments from 0
to your set volume.
To deactivate a sounding alarm, press the Standby button to cancel
a sounding alarm.
Disabling / cancelling alarm setting
To cancel the alarm setting, press and hold the corresponding
alarm button before the alarms sound off.
GB
or )
7