Presetting Stations; Recalling A Preset Station - Sangean WR-22 User Manual

Presetting stations

There are 5 memory presets for each FM/ AM wavebands.
. Press the On/ Off button to turn on the radio.
2. Tune to desired station using one of methods previously described.
3. Press and hold the desired Preset button until the radio beeps.
The preset number will appear in the display and the station will
be stored under the chosen preset button.
4. Repeat this procedure for the remaining presets.
5. Station stored in preset memories may be overwritten by following
the above procedure.

Recalling a preset station

. Press the On/ Off button to turn on the radio.
2. Select the desired waveband by repeatedly pressing the Source
button.
3. Momentarily press the desired Preset button. The preset number
and station frequency will appear in the display.
6