Presetting Stations - Sangean DPR-99+ Manual

Presetting stations

There are 5 memory presets for each of the two wavebands which
allow you to quickly tune the radio to your favourite stations. Presets
are store in a memory which remembers the settings even when the
radio is switched off.
1. Press the On/Off button to switch on your radio.
2. Tune to the required station as previously described.
3. Press and hold the required Preset button until the display shows e.g.
Preset 1 stored. The station will be stored under the chosen preset
button. Repeat this procedure for the remaining presets.
4. Stations stored in the memories may be overwritten by following the
above procedure.
Recalling a preset
1. Press the On/Off button to switch on your radio.
2. Select the required waveband.
3. Momentarily press the required Preset button, your radio will tune to
the station stored in preset memory.
15