Nap Timer - Sangean WR-22 User Manual

Nap timer

. Press and hold the Nap timer button to enter the menu setting.
Keep holding the Nap timer button and the options will start
switching on the display from  to 20 minutes. Stop until the
required Nap Timer setting appears on the display. The setting
will be saved and the LCD will return to normal display with the
'NAP' icon shown on the display.
2. To view the remaining time of an active timer setting, press the
Nap timer button. To cancel a sounding Nap timer, press Standby
button. If any button other than the Standby button is pressed
when the alarm sounds, snooze function will be activated.
To cancel the function when countdown is progressing, go to nap
timer setting menu and select 'OFF'.
GB
33