Tone Control- Treble And Bass - Sangean WR-22 User Manual

Tone control- treble and bass

If you find the preset equalizer functions not to your liking, you may
set up a custom treble and bass setting as follows:
. Press the Volume control rotary once to get into Treble control
setting. Rotate the control until desired treble level is reached.
2. Press the Volume control rotary again to enter Bass control
setting. Rotate the control until the desired bass level is reached.
Press the Volume control to confirm the setting.
Loudness
You can get compensation on lower and higher frequency for your
radio by adjusting the Loudness function.
. Press and hold the Info/menu button to enter the menu setting.
2. Rotate the Tuning control rotary until 'LOUD ON or OFF' shown
on the display. Press the Tuning control rotary to enter the setting.
3. Rotate the Tuning control rotary to choose ON to turn on the
loudness function, then press the Tuning control rotary to confirm
the setting.
4. To turn off the loudness function, select OFF and press the
Tuning control rotary to confirm the setting.
GB
35