Table of Contents
Advertisement
Rheostat
(removed from
Junction Box
rheostat assembly)
Knob (included)
Wire Clamp (included)
A 7/8" diameter hole is provided on this cover
plate (both sides). If this hole is already used
for a gas inlet, you can drill an additional 7/8"
hole in this cover plate.
OFF
LOW
Turn the dial all the
Turn the dial 180°
way counter-clockwise
clockwise until the light
until it clicks off.
begins to glow.
Rheostat
Assembly
HIGH
The high position
is all the way
clockwise.
Advertisement
Table of Contents
