Controls And Functions 24-Bit Digital Effects Section - Samson XML Powered Owner's Manual

24-Bit Digital Effects Section
The XML mixers feature built-in, 24-bit digital effects processors with 100 high-quality, studio grade effects like Delay,
Chorus and Reverb. The following section describes the features of the powerful on-board digital effects section.
12. Effects Program Display - The XML mixers' digital-effects processors feature
dual-digit, seven-segment numerical display for showing the effects PRO-
GRAM number from 00 - 99. You will see the PROGRAM numbers change as
you scroll through the effects preset using the DSP SELECT control. When the
Effects Display shows two straight lines through the center of each segment,
the effects are turned off and the EFX ON switch is in the out position.
13. Effects SELECT - The SELECT control knob is a continuously variable encoder,
that allows you to call up one of the 100 built-in digital effects presets. Rotate
the SELECT knob to scroll through the preset programs using the Effects Pro-
gram Display to choose the number of the effect you want.
14. Effects ON Switch - The Effects ON switch is used to turn the internal digital
effects on and off. The effects are bypassed when the switch is in the out posi-
tion and the Effects Display shows two dashes.
15. Effects PROGRAM List - This section identifies the ten banks of built-in DSP
effects presets. The first bank of ten presets is designed for live performance,
and the subsequent banks are arranged in groups by the type of effect.
16. Effects LEVEL Control - The Aux 2/EFX signals from input channels are mixed
together and sent to the internal DSP and EFX 2 Output. The Effects LEVEL
control is used to adjust the amount of signal send to the DSP and EFX 2
Output.
17. EFX 2 Send Jack - The unbalanced 1/4" EFX 2 Send is used to route a signal
to an external signal processor such as a delay or reverb. The signal present at
the EFX 2 Send is routed from the EFX bus, which is fed from the input chan-
nel's Aux 2/EFX control knob.
18. EFX FOOTSWITCH Jack - Connect a footswitch to the EFX FOOTSWITCH
phone input jack to toggle the internal digital effects On and Off.
Owner's Manual
Controls and Functions
XML POWERED MIXERS
12
13
12
14
13
14
15
15
16
16
17
18
17
18
9