Restoring The To Its Factory; Default Settings - Zoom A3 Operation Manual

About the Firmware
5
To complete updating
• When the
• Disconnect the USB cable.
HINT
• Updating the firmware will not erase saved patch memories.
Restoring the
1. To use the All Initialize function
• While pressing
• The All Initialize screen appears.
2. To execute the All Initialize function
• Press
HINT
• Executing the All Initialize function will restore all the settings of the
factory defaults. Do not use this function unless you are certain that you want to do this.
32
has finished updating, "Complete!" appears on the display.
to its Factory Default Settings
, set the POWER switch to ON.
.
NOTE
• Press any key other than
, including its patch memories, to
to cancel.