Zoom A3 Operation Manual page 36

Effect Types and Parameters
ZNR
GraphicEQ
ParaEQ
Exciter
AutoWah
[MOD]
Tremolo
Phaser
36
ZOOM's unique noise reduction cuts noise during pauses in playing without affecting the tone.
Knob1
THRSH 1–25
Page01
Adjusts the effect sensitivity.
Page02
This unit has a 6-band equalizer.
Knob1
160Hz -12–12
Page01
Boosts or cuts the low (160 Hz) frequency
band.
3.2kHz -12–12
Page02
Boosts or cuts the high (3.2 kHz)
frequency band.
Level 0–150
Page03
Adjusts the output level.
This is a 2-band parametric equalizer.
Knob1
Freq1 20Hz–20kHz
Page01
Adjusts center frequency of EQ1.
Freq2 20Hz–20kHz
Page02
Adjusts center frequency of EQ2.
Level 0–150
Page03
Adjusts the output level.
This exciter is in the style of the BBE Sonic Maximizer.
Knob1
Bass 0–100
Page01
Adjusts the amount of low-frequency
phase correction.
Page02
This effect varies wah in accordance with picking intensity.
Knob1
Sense -10– -1, 1–10
Page01
Adjusts the sensitivity of the effect.
Page02
This effect varies the volume at a regular rate.
Knob1
Depth 0–100
Page01
Adjust the depth of the modulation.
UP 0–UP 9,
Wave DWN 0–DWN 9,
Page02
TRI 0–TRI 9
Sets the modulation waveform.
This effect adds a phasing variation to the sound.
Knob1
Rate 1–50
Page01
Sets the speed of the modulation.
Page02
Knob2
DETCT GtrIn, EfxIn
Sets control signal detection level.
Knob2
400Hz -12–12
Boosts or cuts the low-middle (400
Hz) frequency band.
6.4kHz -12–12
Boosts or cuts the extremely high
(6.4 kHz) frequency band.
Knob2
Q1 0.5, 1, 2, 4, 8, 16
Adjusts EQ1 Q.
Q2 0.5, 1, 2, 4, 8, 16
Adjusts EQ2 Q.
Knob2
Trebl 0–100
Adjusts the amount of high-frequency
phase correction.
Knob2
Reso 0–10
Adjusts the intensity of the resonance
sound.
Knob2
Rate 0–50
Adjusts the rate of the modulation.
Knob2
4 STG, 8 STG,
Color
inv 4, inv 8
Sets the tone of the effect type.
Knob3
Level 0–150
Adjusts the output level.
Knob3
800Hz -12–12
Boosts or cuts the middle (800 Hz)
frequency band.
12kHz -12–12
Boosts or cuts the harmonics (12
kHz) frequency band.
Knob3
Gain1 -12–12
Adjusts EQ1 gain.
Gain2 -12–12
Adjusts EQ2 gain.
Knob3
Level 0–150
Adjusts the level of the signal after it
has passed through the module.
Knob3
Level 0–150
Adjusts the output level.
Knob3
Level 0–150
Adjusts the output level.
Knob3
Level 0–150
Adjusts the output level.