Returning The Fire-30 To The Factory Default Settings (All Initialize) - Zoom FIRE-30 Operation Manual

4.
To return to manual mode, press the foot switch again, or press the [MANUAL] key.
Returning the FIRE-30 to the factory default settings
(all initialize)
If required, you can return the settings of the user patches (U0 - U9) to the condition in which the
unit was shipped. (This function is called "all initialize".)
N
OTE
When you carry out this function, any settings that you have stored in user patches will be lost. Proceed with
care.
1.
Hold down the [STORE] key while turning power to the unit on.
The indication "AL" appears on the display.
2.
To execute the all initialize function, press the [STORE] key once more.
All user patches are returned to the factory default condition. If you wish to cancel the process,
press the [EXIT] key instead of the [STORE] key.
ZOOM FIRE-30
A L
Using the FIRE-30
17