Zoom A3 Operation Manual page 39

StompDly By turning the feedback up on this stomp-style delay, you can make it self-oscillate.
E.LVL
Page01
Adjusts amount of effect sound
mixed with original sound.
Sync
Page02
Activates tempo sync.
HiDMP
Page03
Adjusts the treble attenuation of the
delay sound.
[REVERB]
HD Reverb This is a high-definition reverb.
Decay
Page01
Sets the duration of the reverberations. Adjusts the tone.
PreD
Page02
Adjusts the delay between input of the
original sound and start of the reverb sound.
Tail
When ON, effect sound continues
Page03
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Hall This reverb effect simulates the acoustics of a concert hall.
Decay
Page01
Sets the duration of the reverberations. Adjusts the tone.
PreD
Page02
Adjusts the delay between input of the
original sound and start of the reverb sound.
Room This reverb effect simulates the acoustics of a room.
Decay
Page01
Sets the duration of the reverberations. Adjusts the tone.
PreD
Page02
Adjusts the delay between input of the
original sound and start of the reverb sound.
TiledRoom This reverb effect simulates the acoustics of a tiled room.
Decay
Page01
Sets the duration of the reverberations. Adjusts the tone.
PreD
Page02
Adjusts the delay between input of the
original sound and start of the reverb sound.
Knob1
0–120 F .B
Adjusts the feedback amount.
OFF , – x8 Mode
Sets output to mono or stereo (STR).
When stereo, effect sound is output
from L channel and unchanged input
sound is output from R channel.
0–10
Knob1
0–100 Tone
1–200 HPF
Adjusts high-pass filter cutoff frequency. Adjusts the output level.
OFF/ON
Knob1
1–30 Tone
1–100 Level
Adjusts the output level.
Knob1
1–30 Tone
1–100 Level
Adjusts the output level.
Knob1
1–30 Tone
1–100 Level
Adjusts the output level.
Knob2
0–100 Time
Sets the delay time.
MONO, STR Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Knob2
0–10 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–10 Level
Knob2
0–10 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Knob2
0–10 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
Knob2
0–10 Mix
Adjusts the amount of effected sound
that is mixed with the original sound.
0–150 Tail
When ON, effect sound continues
even after effect is turned off. When
OFF , effect sound stops right when
effect is turned off.
NEXT
Knob3
1–600
OFF/ON
Knob3
0–100
0–150
Knob3
0–100
OFF/ON
Knob3
0–100
OFF/ON
Knob3
0–100
OFF/ON
39